Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Forced Induction - V8 (http://www.camaro5.com/forums/forumdisplay.php?f=74)
-   -   Car goes in this week. (http://www.camaro5.com/forums/showthread.php?t=302227)

Rdunn 06-16-2013 05:01 PM

Car goes in this week.
 
Car goes back to CBI&DSX this week(Thursday). car should be an animal when it comes out. going to be making a run for the top couple spots of the E.T list for power adder class.

parts being added on this week:

Rpm level 5 4L80e (good to 1000+hp)
precision single disc converter (1000hp) made with the car being bottled in mind.
Nitrous Outlet Dual Nozzle Dry system (100hp shot)
Alky Control Meth System
DSS one piece driveshaft
Squash Fuel system (will support 1000+hp)
Smaller whipple pulley (currently running a 3.875)
PCS Trans Controller
Weld RTS 17" bigs/Skinnies (black centers)

:cool:

Mods already on the car:

2.9 Whipple
650 lift Comp Cam
ID850's
2" headers/x-pipe/magnaflow axel back
ARP Headstuds
LS3 Conversion
Rotofab CAI
Nitto Dr's (20")
Boost-a-pump
Trans-Cooler
Comp Rocker trunion upgrade

Supercharged SS 06-16-2013 05:27 PM

Quote:

Originally Posted by Rdunn (Post 6677346)
Car goes back to CBI&DSX this week(Thursday). car should be an animal when it comes out. going to be making a run for the top couple spots of the E.T list for power adder class.

parts being added on this week:

Rpm level 5 4L80e (good to 1000+hp)
precision single disc converter (1000hp) made with the car being bottled in mind.
Nitrous Outlet Dual Nozzle Dry system (100hp shot)
Alky Control Meth System
DSS one piece driveshaft
Squash Fuel system (will support 1000+hp)
Smaller whipple pulley (currently running a 3.875)
PCS Trans Controller
Weld RTS 17" bigs/Skinnies (black centers)

:cool:

Mods already on the car:

2.9 Whipple
650 lift Comp Cam
ID850's
2" headers/x-pipe/magnaflow axel back
ARP Headstuds
LS3 Conversion
Rotofab CAI
Nitto Dr's (20")
Boost-a-pump
Trans-Cooler
Comp Rocker trunion upgrade

Sounds like an excellent plan. Long way from 11's to 9's. :nod:


What tires? Stock block?

SRT10KLLR 06-16-2013 05:37 PM

Consider going to a triple disc converter if you are planning on big power. Everything else looks sweet.:thumbup:

Whipped416 06-16-2013 05:41 PM

Will need 10 rib setup and built motor

Supercharged SS 06-16-2013 05:43 PM

Quote:

Originally Posted by Whipped416 (Post 6677455)
Will need 10 rib setup and built motor

Or a broom and shovel to clean up the parts.:sm0:

Mr. Nasty 06-16-2013 05:54 PM

Nice and why not a triple disc converter??? I run the FTI triple disc conv with my home built level 5 4L80E

Rdunn 06-16-2013 10:45 PM

guys at rpm said the single disc would be better for it and that the triple would hurt 60' times. plus he said the single would be better for when the car is on the bottle. they are the experts so thats what i went with.

Rdunn 06-16-2013 10:53 PM

Quote:

Originally Posted by Supercharged SS (Post 6677419)
Sounds like an excellent plan. Long way from 11's to 9's. :nod:


What tires? Stock block?

its a jump, but im pretty confident in it. nothing is for sure till it runs it. thats why i said trying for a top spot.

i will be running 17" mt's. completly stock shortblock...minus cam. gonna see how fast i can go on it. going to order pistons, rods and a set of mast heads soon as the car gets back from this round of mods. but going to keep the stock cubic inches. i do alot of traveling with my drag radial car so i figure i will just bring the camaro with me to all the tracks also. lots more chances to refine the susp and keep knocking the times down. wont happen over night but i am coming for that number 1 spot.;)

Supercharged SS 06-17-2013 10:17 AM

Quote:

Originally Posted by Rdunn (Post 6678574)
its a jump, but im pretty confident in it. nothing is for sure till it runs it. thats why i said trying for a top spot.

i will be running 17" mt's. completly stock shortblock...minus cam. gonna see how fast i can go on it. going to order pistons, rods and a set of mast heads soon as the car gets back from this round of mods. but going to keep the stock cubic inches. i do alot of traveling with my drag radial car so i figure i will just bring the camaro with me to all the tracks also. lots more chances to refine the susp and keep knocking the times down. wont happen over night but i am coming for that number 1 spot.;)

Good luck.:D

Maybe Ill take my car out of partial retirement when someone goes faster.

Will you have this car at the camaro fest?

Rdunn 06-17-2013 01:24 PM

Quote:

Originally Posted by Supercharged SS (Post 6679690)
Good luck.:D

Will you have this car at the camaro fest?

:thumbup: thanks.

as far as camaro fest, i'll be at work on the ambulance on the 2nd & 3rd so i wont be able to make it.

Rdunn 06-17-2013 01:37 PM

here is a couple of my drag radial car builds if anyone is bored.

http://www.youtube.com/watch?v=Nx3tfMR9xlk
http://www.youtube.com/watch?v=uCDbBAdgwmk
http://www.youtube.com/watch?v=E_v3IBXfdSw
http://www.streetfire.net/video/rdunn-stang_501655.htm

Dznts 06-17-2013 02:48 PM

:popcorn:

Bucci 06-17-2013 09:47 PM

Nice build:headbang:

Rdunn 06-17-2013 11:16 PM

Thanks


All times are GMT -5. The time now is 12:23 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.