Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Engine | Exhaust | Bolt-On | Drivetrain Modifications (http://www.camaro5.com/forums/forumdisplay.php?f=145)
-   -   cam/heads break in period (http://www.camaro5.com/forums/showthread.php?t=302333)

timszl1 06-17-2013 10:46 AM

cam/heads break in period
 
im gunna be getting custom heads and a custom cam and read on different forums that it didint need a break in period and some that said they did need to be broken in but regardless you needed to do a heat cycle on the springs i wanna know if day one when i get the cam/heads installed will i be able to get on it with no problems

CanadianZL1#992 06-17-2013 08:05 PM

Quote:

Originally Posted by timszl1 (Post 6679795)
im gunna be getting custom heads and a custom cam and read on different forums that it didint need a break in period and some that said they did need to be broken in but regardless you needed to do a heat cycle on the springs i wanna know if day one when i get the cam/heads installed will i be able to get on it with no problems

I imagine with heads and cam you'll be getting the car tuned. I had a cam and dual valve springs installed along with some other stuff, then my car was run for several hours on a dyno ( 5 pulls I believe) my guess is its broke in

timszl1 06-18-2013 12:39 AM

Quote:

Originally Posted by CanadianZL1#992 (Post 6682452)
I imagine with heads and cam you'll be getting the car tuned. I had a cam and dual valve springs installed along with some other stuff, then my car was run for several hours on a dyno ( 5 pulls I believe) my guess is its broke in

thanks i was told the same thing by a couple friends just wanted to make sure:thumbup:


All times are GMT -5. The time now is 02:45 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.