Stillen - Whipple Superchargers!
Stillen is proud to announce the relationship with Whipple superchargers. STILLEN and Whipple Superchargers have just signed a new agreement ensuring there will be a facility in the Southern California region able to distribute, install, and support all Whipple supercharger systems. For many years STILLEN has been recognized as one of the premier high performance shops in Southern California and Whipple Superchargers have been known to produce the most power of any supercharger system. Now the two will come together to support all of Southern California. STILLEN is the only recognized and warranty certified installer in the Southern California area for all Whipple Superchargers. When you have your supercharger kit installed by STILLEN you can rest assured that your vehicle will be eligible for coverage under the Whipple 3 year/36,00 mile, 5 year/60,000 mile or even the 5 year/100,000 mile warranty options!
We have kits in stock and ready to install on your vehicle! Call me directly at 714-540-5566 ext 174 today to schedule your appointment.
Only twin-screw that's 50-state emissions legal
Front entry W175ax (2.9 liters) Whipple twin-screw supercharger that significantly outflows competitions 1.9L and 2.3L roots-type systems
Integrated casting to minimize bolt on pieces, adapters, leaks and flow restrictions
Integrated Crusher ™ venturi shaped inlet for maximum airflow capacity and minimal rotor cavitations
Integrated Crusher ™ 112mm round inlet outflows smaller 90 and 93mm inlets such as other Eaton based systems
Integrated Crusher ™ 112mm round inlet for optional 102mm, 105mm and 112mm TB's that outflow others 110mm
Big Mouth Whipple Crusher ™ plastic air inlet for increased velocity and lower inlet temps vs. steel and aluminum tubes
Optional Crusher™ 120mm (4.75") air inlet system that outflows competition
Integrated design allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas
Massive air-to-water aluminum bar-plate intercooler offers more cooling than any other positive displacement system available
Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy, no ridiculous fabbed steel tubes
Self-contained oversized oil system for dramatically reduced oil temps in even the most demanding conditions
Exclusive 3x5 rotor combo for significant increase in airflow under the curve than less efficient 4x6 rotor combo
Zero turn inlet allows for decreased induction losses when compared to rear inlet systems and 180deg bends
Center discharge port for better cylinder to cylinder distribution then other twin-screws with cobbled together billet adapters and forward facing discharge
Discharge down design allows for less pressure loss which gives more power at lower boost levels
Top mount design allows for cooler operation then upside down SC's that conduct heat from engine and are trapped by runners and covers, causing hotter manifold temps and less power per pound of boost
More boost at the "hit" than any other twin-screw
Flat torque curve for incredible acceleration
MSD ™ Fuel pump booster with pre-defined voltage curve for less pump duty cycle then other pump boosters, only supplies increased voltage when needed, others are on/off
MSD ™ Fuel pump booster voltage curve can be adjusted by user, no need to purchase "competition" version, already included
Oversized heat exchanger for incredible intercooler water temps
Optional 4.5 liter supercharger for race applications
Fits under factory hood with no modifications
No internal modifications required
Completed installation looks factory installed, not some cobbled together kit with multiple billet adapters
Kits come complete with all necessary parts and hardware for installation
Unique oil level sight glass for easy oil level and quality check, no dipstick to bind or misread
Plug and play wiring, no cutting or splicing
High flow air filter system (50-state legal filter system), coolant reservoir is maintained
High flow fuel injectors (63lb/hr)
Proven 6-rib belt system with heavy duty spring loaded tensioner and adjustable idler system
Stainless steel jack-shaft with unique plastic cover for increased safety
OEM quick connect fittings for easy installation
Complete kits, Tuner kits and Hot Rod kits are available
Available in wrinkle black, polish or any custom color
Easily upgradeable with big cold air intakes and bigger throttle bodies (102mm or 112mm)
Instant boost at the touch of the throttle
3 minute pulley changes
1 year warranty
We just finished installing another Whipple on a customers SS.
Pictures coming soon!
|All times are GMT -5. The time now is 01:06 AM.|
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.