Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Cosmetics and Lighting Modification Discussions (http://www.camaro5.com/forums/forumdisplay.php?f=37)
-   -   How do I get my JDP halos to work! (http://www.camaro5.com/forums/showthread.php?t=306875)

infernostripes! 07-10-2013 11:36 PM

How do I get my JDP halos to work!
 
One of them is white and the other is purple. Ive tried reseting the remote by holding the 2 brightness buttons and power and then turing the power switch on and nothing happens:noidea:

Any suggestion please?

Badman24 07-10-2013 11:47 PM

Yeah called jdp toll free at 888-308-6007. I'm sure they will help you out.

OKCwhiteKnight 07-11-2013 12:29 AM

Common problem, amongst the club members here anyways.Mine(whites) were alittle bluish on one,purpleish on the other.I went through two control box's.I recently installed Nightowl systems JDP upgrade kit,which just replaced the box.The whites were the same,so it was the led's (in my case).The nightowl controller lets you color correct and customize the colors including white.

MackMan 07-11-2013 09:06 AM

OP - It's probably just the ground. I had this issue as well, sent my box back to JDP and they fixed something inside of it. Recently I had the same issue again so I took the wheel well screws out and played with the ground on the horn - seemed to have fixed the issue temporarily. Going to get a new ground location and one of the washers that bite into the metal for a better ground.

See if this fixes your issue too. If not call JDP for sure! They're very helpful.

Edit: Just to be clear, you're holding the brightness up & down + power for 30 seconds, unplugging the fuse for battery power, and still holding the buttons for another 30 seconds? Then the remote should be reset.

StOrM TrOOpEr 08-19-2013 08:45 PM

Quote:

Originally Posted by OKCwhiteKnight (Post 6773459)
Common problem, amongst the club members here anyways.Mine(whites) were alittle bluish on one,purpleish on the other.I went through two control box's.I recently installed Nightowl systems JDP upgrade kit,which just replaced the box.The whites were the same,so it was the led's (in my case).The nightowl controller lets you color correct and customize the colors including white.

i guess ur one of those that upgraded from jdp to nightowl halos.. how do u like it? im fed up with these problems with jdp halo kit.. so i guess il fix it one more time and see how it goes.

i just cant accept it that i have to pay another 500 for the halo kit after paying 300 for the jdp. but i guess im not alone


All times are GMT -5. The time now is 10:32 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.