Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 Bolt-Ons & Tunes (http://www.camaro5.com/forums/forumdisplay.php?f=78)
-   -   Pfadt Long Tube Tri-Y Headers ARE BACK @ APEX Motorsports!!! (http://www.camaro5.com/forums/showthread.php?t=307189)

Apex Motorsports 07-13-2013 06:17 PM

Pfadt Long Tube Tri-Y Headers ARE BACK @ APEX Motorsports!!!
 
http://www.apex-speed.com/images/detailed/5/1450050.jpg

Pfadt Race Engineering Long Tube Camaro Tri-Y Headers With Cats: $1699.99 SHIPPED!!!


Pfadt Race Engineering Long Tube Camaro Tri-Y Headers With Off Road Pipes: $1299.99 SHIPPED!!

Pfadt Power Products now brings you a race-proven Tri-Y header design making more HP and Torque at an affordable price!
  • TRI-Y Design, 4-2-1 tube merging
  • Makes much more torque under the curve, while still increasing top end HP
  • 1.875/2.125" tube diameter
  • Direct connection to factory X-Pipe and after market Cat-backs
  • CNC flanges with OEM locating features
  • Fully hand-TIG welded on-site
  • T-304 16 Gauge Stainless Steel
  • Fully Brushed Stainless Steel Finish
  • V-Band Clamp connections
  • Equal length long tubes
  • Available with and without Catalytic Converters
  • Full 3" collector
  • Comes with bullet-nosed flange bolts for installation
  • O2 Sensor extenders
  • Cometic Multi-Layer Steel gasket upgrade
  • Exhaust system with Cats is 24lbs lighter than factory
  • Exhaust system without Cats is 27lbs lighter than factory
aFe Power is proud to introduce the all new PFADT Series Tri-Y Headers and performance Connection Pipes for the 2010-2015 Chevrolet Camaro V8-6.2L engines. These PFADT Series combos utilize mandrel bent 304 stainless steel brushed tubing and have high quality laser cut CNC machined flanges. Available in either Street or Race versions, the Street version comes equipped with dual 200 CPSI high flow catalytic convertors. The PFADT Series tri-y headers are constructed of 1-7/8” primary tubing which merge to 2-1/8” secondary tubes, then into a 3” collector. The tri-y design pairs opposite firing cylinders with equal, specifically tuned primary lengths, maximizing scavenging and torque throughout the powerband. The headers and connection pipes are connected using high grade v-band flanges for a secure leak-free seal.

http://www.apex-speed.com/images/det...5/1450050a.jpg
http://www.apex-speed.com/images/det...5/1450050b.jpg
http://www.apex-speed.com/images/det...5/1450050c.jpg
http://www.apex-speed.com/images/det...5/1450050d.jpghttp://www.apex-speed.com/images/det...5/1450050g.jpg
http://www.apex-speed.com/images/det...5/1450050f.jpg
http://www.apex-speed.com/images/det...5/1450050e.jpg

ARES5 07-15-2013 07:33 PM

Just sent payment for the Pfadt headers. Thanks so much Chase for taking care of me.

DanSSRS 07-16-2013 11:41 PM

Could I get a price for non catted and shipping to Ottawa Canada K2J 4M7
?

Zabo 07-30-2013 04:12 PM

$1425? :faint:

If only I was made of money, but alas..

Pharmaro 08-07-2013 09:53 AM

Are these available without cats?

DanSSRS 08-07-2013 02:23 PM

Yes

Apex Motorsports 08-07-2013 06:33 PM

Yes they are Steve. $1299 shipped.

Pharmaro 08-08-2013 07:09 PM

Thanks for enabling my addiction Chase! Can't wait for these bad boys to arrive.

Apex Motorsports 08-15-2013 07:52 PM

No problem. Thanks for your order.

the rich dude 10-06-2013 09:11 PM

If I were to purchase these Headers without cats would a Kooks cat back with off road pipes bolt right up?

14pilot 10-06-2013 10:52 PM

Can you put this setup together for me?

- Pfadt headers with cats (hoping a full 3" connection to catback is possible)
- Stainless works retro chambered catback with 3" "race" connection (OEM GFX tips)

Apex Motorsports 10-07-2013 11:35 AM

PMs sent to both.

SLEEPER SS 10-07-2013 07:09 PM

Price on these shipped to 33012 with no cats

SLEEPER SS 10-07-2013 07:10 PM

And will these fit my mbrp 3in exhaust?


All times are GMT -5. The time now is 10:44 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.