Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (http://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   Received my Brembo take offs... (http://www.camaro5.com/forums/showthread.php?t=309905)

intensifi 07-28-2013 11:18 PM

Received my Brembo take offs...
 
2 Attachment(s)
I finally had time to unpack, inspect and clean them.

The person I bought them from painted them red. Unfortunately the piston and dust boot were not masked off before painting. :frown:

I cleaned them off pretty well using a kitchen sponge with Simple Green.

The pics show what I was able to remove so far.

I'm thinking I should follow the procedures in this thread to change out the dust boots and fully clean the piston tops before using the calipers.

http://www.camaro5.com/forums/showthread.php?t=305558

Any suggestions?


All times are GMT -5. The time now is 12:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.