Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (http://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   Pedders drop link question. (http://www.camaro5.com/forums/showthread.php?t=309928)

ackeight 07-29-2013 08:45 AM

Pedders drop link question.
 
If anyone has followed my other thread I just got done installing the zl1 rear sway bar conversion with the xa coilovers. I'm getting a clunking sound from the rear at low speed and minor bumps. I checked every bolt that connects to the lca and everything is torqued correctly. The only thing that I can think of is the drop links. You can't tighten them till there is weight on the wheels so I can't get a torque wrench on them. How do I know they are tight enough? I was wrenching on them and got to the point where I can hear the bushings rub hard up against the metal. Should I tighten until I can't turn anymore? They look fine with weight in wheels. Once the car is lifted the bar drops a bit and I can see the bolt a little. Is this normal. Help please.

JusticePete 07-29-2013 08:47 AM

When the nut stops. Crank em down.

ackeight 07-29-2013 09:20 AM

Ok. I'll tighten the crap out of them. Haha. I'll get back to you in a few hrs. Thanks.

ackeight 07-29-2013 10:31 AM

2 Attachment(s)
Ok I tightened them up. Still hearing rattling. Grrr. I'm running out of ideas. Here are pics of them. Attachment 538228Attachment 538229


All times are GMT -5. The time now is 01:07 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.