Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (http://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   BMR springs w/ Stock suspension noise ADVICE PLEASE (http://www.camaro5.com/forums/showthread.php?t=332698)

Addicted2upgrades 12-14-2013 09:27 PM

BMR springs w/ Stock suspension noise ADVICE PLEASE
 
I have BMR lowering springs 1" drop. I have a BMR sway bar also. The sound coming from the rear is like the sound of having 2 porcelain bowls stacked on each other and when I go over small bumps they raise and rattle for a half second...now I've had an alignment and have been under the car 4 times to re tighten and all that jazz....what I think it is is either the stock shock gave out OR where the shock actually connects to the lower control arm where the bolt goes through is metal on metal....are there any bushings for that or is this normal? I can't find anything related on the forums, though I'm only on 22 ha.

Any feedback is appreciated Thanks guys

pat

Synner 12-14-2013 11:55 PM

Tighten sway bars, check to see if coils are seated.

Shocks going out would not cause those symptoms, its either something loose or the springs.

Lil' Nasty 12-15-2013 12:17 AM

Could be the end link nut to the control arm, probably just loose.

Apex Motorsports 12-15-2013 09:13 AM

I agree with the other two, something is loose.

BMR Sales 12-16-2013 01:58 PM

Quote:

Originally Posted by Addicted2upgrades (Post 7261788)
I have BMR lowering springs 1" drop. I have a BMR sway bar also. The sound coming from the rear is like the sound of having 2 porcelain bowls stacked on each other and when I go over small bumps they raise and rattle for a half second...now I've had an alignment and have been under the car 4 times to re tighten and all that jazz....what I think it is is either the stock shock gave out OR where the shock actually connects to the lower control arm where the bolt goes through is metal on metal....are there any bushings for that or is this normal? I can't find anything related on the forums, though I'm only on 22 ha.

Any feedback is appreciated Thanks guys

pat

Definitely get up under the car and make sure that everything is good and tight and that nothing is loose. If you still can't get it figured out give us a call here at the shop and we will help you get it all figured out.


All times are GMT -5. The time now is 05:37 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.