Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (http://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   1le suspension swap (http://www.camaro5.com/forums/showthread.php?t=333059)

jake2212 12-17-2013 03:12 PM

1le suspension swap
 
hey all, I am swapping from my fe3 suspension set up to the 1le sways/control arms/end links. i just had a question or two concerning the lower control arm and the rear shock. how hard is it to put back onto the control arm? i guess my concern is how difficult will the whole process be to install all the parts?

nak3dsnake 12-17-2013 03:47 PM

Quote:

Originally Posted by jake2212 (Post 7267432)
hey all, I am swapping from my fe3 suspension set up to the 1le sways/control arms/end links. i just had a question or two concerning the lower control arm and the rear shock. how hard is it to put back onto the control arm? i guess my concern is how difficult will the whole process be to install all the parts?

For me it wasn't that hard it just took so time. Changing the rear toe links was the most difficult part of the process. But i did the full kit. If your not changing the shocks then its easy. Just remove the control arm and mount the new one. you will probably have to compress the shock a little as it'll move outward after you take the control arm off. It should all line right back up otherwise. Then the sway bar will take a bit of maneuvering to get in but isn't too difficult.


All times are GMT -5. The time now is 01:29 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.