Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums -

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - (
-   USA - Rockies / Midwest (
-   -   Eastern Iowa? (

Venice 08-01-2009 06:13 PM

Eastern Iowa?
I know besides my Inf Org 2SS/RS, there are at least 4-5 others in the area (CR, Iowa City, etc). Any on the forums here?

InfernoFlame 08-05-2009 11:27 AM

IOM 2SS/RS right here in Sioux City

Brokinarrow 08-05-2009 02:56 PM

erm... Sioux City would be west, not east. I'm right in the middile in Indianola (just south of Des Moines)

MontyCarlo 08-05-2009 04:36 PM

I've got an IBM in Cedar Rapids.

jlnx2 LS3 08-12-2009 08:14 PM

Northeast Iowa owner.
I FINALLY am getting my 2SS/RS LS3 Manual M6. Ck it out...preproduction ordered 10/08. Built June '09...3 QC I was told (the shifter issue) On rail 8/7/09. Dealer told me today might have Friday/Saturday! Unbelievable delay receiving this car! Black/Black with white rally stripes. Ready to when recieved.

Rusted Virtue 08-22-2009 07:04 AM

I've got a rally yellow car in Clinton

SSPooler2010 08-22-2009 07:51 AM

I have a 2SS on order (black) with gray interior. Just like Rusted Virtue, we originally went with the 1SS, then changed our order. Our TPW is 8/31, so I am HOPING to be able to get some miles on it before I have to put it away for the winter!

camaros and vettes 08-22-2009 11:48 AM

I have a 2 SS/RS IBM near iowa city. just south in hills. anyone want to have a little meet and greet?? let me know

jlnx2 LS3 08-23-2009 08:59 PM

jlnx2 LS3
Picked up the car 8/22/09 @ dealership. IT WAS ABSOLUTELY WORTH THE WAIT! The car is gorgeous and is a serious great car to drive.
Got it with 3 miles on ODO. As of today 140 miles. I will be posting pics. Black with white rally stripes. LOVE THE CAR! IF YOU ARE WAITING...IT IS WORTH IT.

jlnx2 LS3 08-23-2009 09:03 PM

Did you pick up you car @ Rydell Chevrolet in Waterloo?....I know that there was one in Hills that came from the same dealer that I got mine from....let me know.

SSPooler2010 09-05-2009 10:39 AM

Well I am happy to report that we have a VIN number our car is scheduled to be here on September 14!

camaros and vettes 09-07-2009 07:28 PM


Originally Posted by jlnx2 LS3 (Post 835345)
Did you pick up you car @ Rydell Chevrolet in Waterloo?....I know that there was one in Hills that came from the same dealer that I got mine from....let me know.

yes i did. i got there first one!!

camaros and vettes 09-07-2009 07:31 PM

i think we should have a meet and greet before the iowa winter hits and makes us put our cars away for the year. i will do some work on it if i can get people to say they will come.

Brokinarrow 09-08-2009 03:35 PM

:word: Let me know, would love to come out and see the different colors :D

SSPooler2010 09-13-2009 09:08 AM

I would be more than happy to drive somewhere to get our cars together! I know I'm in central Iowa, but it would be worth the drive just to get some miles on the car before having to put it away for the winter! Its been a VERY long 13 weeks already! I should have my car this Friday! As of 9/11, it was in Wisconsin, waiting for a truck to bring it to me.

Rusted Virtue 09-13-2009 03:41 PM

I could be in for a M&G sometime too

Brokinarrow 09-14-2009 02:25 PM

Ok, well where is everyone from? lets find a central location we can meet up at, go for a cruise and then grab some dinner and some beers or something.

As for the day, would the 26th work (next Saturday), or maybe Oct 3? (should still be warm by then)

RJBJFIRE 09-15-2009 05:46 PM

Im in...

RJBJFIRE 09-15-2009 05:57 PM

Anyone in Iowa have any mods on yet. What are they? Good or bad? I have a Silver 2SS RS that I did some work on.
I would like to get it on a Dyno to see some real #s. Anyone know of a good shop? I am also in on any trips that you may have in mind.

2010 HPE550 Camaro Package (available for 6sp & auto)

562 bhp @ 6,200 rpm
557 lb-ft Torque @ 4,200 rpm 

0 - 60 mph: 3.6 sec. *
1/4 mile: 11.7 @ 121 mph *
* Performance numbers obtained with optional 20 inch drag radial tires and wheels.

Magnuson / Hennessey Supercharger System
Corsa Stainless Steel Exhaust System
Hennessey Air Induction System
Hennessey High Flow Fuel Injectors
Hennessey Engine Management Calibration
Hennessey Aluminum Wheel Upgrade (uses factory tires)
Hennessey Cam-Aero™ Urethane Body Components: Rear Lip Spoiler, Front Splitter & Side Rocker Panels
Hennessey Exterior Graphics Package (rear quarter panels)
Hennessey Premium Floor Mats
Hennessey & HPE550 Exterior Badges
Serial Numbered Plaque in Interior & Engine Compartment
3 Year / 36,000 Mile Limited Warranty

camaros and vettes 09-18-2009 12:31 AM

Im in of course, im near iowa city there is a great little park down here that is wide open. and i have a place where people could come clean up there cars from the drive. the park has paved parking lot as well. two places to eat, bar and grill and a mexican place that also has a beer. the 26 of this month would work for me the following wouldn't due to my dam job. but the 10 would work.

camaros and vettes 09-18-2009 12:33 AM

as far as mods go i have,
new era CAI
Jet Mass Air Flow
Exhaust Diverter from noweeds
Hurst that should be here next week!! fingers crossed

jlnx2 LS3 09-18-2009 01:32 PM

Sounds like everyone can get together in IC on 9/26/09? Where is the park? In IC? Let me know the place/time & I will try to make it down. I am in Cedar Falls.
jlnx2 LS3

Brokinarrow 09-18-2009 04:06 PM

Yeah, that sounds good. Lets plan on meeting at the park that Camaros and Corvettes mentioned. Let us know where thats at, I'll google it :D

camaros and vettes 09-20-2009 11:11 AM

ok to get here,
Take interstate 380 or 218 south the exit 85, that is the hills exit. at the stop sign on off ramp go left< over the interstate to another stop sign, go straight past the school and the park will be on right. send me an email if you will want to clean up your car. nice place that is inside.

ok know for the time. wanna shoot for around 11am?? and do we want to use the 27 sunday for a back up day??

this is going to be fun, i cant wait!!

Brokinarrow 09-21-2009 12:27 PM

That sounds good to me, not sure where everyone else will be driving from though. May need to go with like 3 pm or so? If everyone is central or eastern though I think 11 could work.

So I checked this out on Google maps, looks like the park is right next to a few baseball fields? Just wantin to make sure I got the right spot here :D

All times are GMT -5. The time now is 09:41 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.