Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (http://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   PFADT CAMBER PLATES NEEDED (http://www.camaro5.com/forums/showthread.php?t=353917)

CHMSC 04-20-2014 02:30 AM

PFADT CAMBER PLATES NEEDED
 
Anyone have a set for the pfadt coilovers they would like to sell? Part number 1410111

bannonm 04-20-2014 08:46 AM

Quote:

Originally Posted by CHMSC (Post 7595860)
Anyone got some for the pfadt coilovers they would like to sell?

Ha, stand in line. So far three of us are looking for them. Maybe we can convince Apex Motorsport to start making them since they now have some of Pfadt's designs.

CHMSC 04-20-2014 12:08 PM

Bump

Lio Martinez 04-20-2014 12:55 PM

Guess I got real luck by posting and finding a seller for them

CHMSC 04-20-2014 01:22 PM

Might have to borrow yours and get a few sets machined

mst504 04-20-2014 02:07 PM

Your going to have to track down the correct hardware too, if you get them machined.

CHMSC 04-20-2014 05:51 PM

:popcorn:

CHMSC 04-21-2014 01:11 PM

TTT

CHMSC 04-21-2014 08:26 PM

Bump

CHMSC 04-22-2014 09:16 PM

:popcorn:

Lio Martinez 04-22-2014 09:18 PM

Quote:

Originally Posted by mst504 (Post 7596650)
Your going to have to track down the correct hardware too, if you get them machined.

Like what hardware?

bannonm 04-23-2014 11:04 AM

Quote:

Originally Posted by Lio Martinez (Post 7603666)
Like what hardware?

Probably means the bearing. Only other "hardware" are the bolts and the large snap ring.

Lio Martinez 04-25-2014 02:11 PM

Bump

CHMSC 04-25-2014 03:12 PM

Thnx man

CHMSC 05-11-2014 03:16 PM

TTT

130R 05-11-2014 05:31 PM

What's different about the Pfadt coilovers? If they'll work with Pedders camber plates, I've got a set for sale here.

CHMSC 05-11-2014 07:58 PM

I would but don't want to cut my shock towers up

Pfadts you don't need to cut anything

CHMSC 07-09-2014 08:49 PM

:popcorn:

2012LS3VERT 07-09-2014 09:44 PM

Still working man. The bearings have a pretty long lead time. I do have a set of coilovers here so that I can model both styles. The only difference is the interchangeable spring seat. Actually quite a few individual parts on these, but bearings and other production schedules holding me back.

CHMSC 07-09-2014 10:01 PM

Quote:

Originally Posted by 2012LS3VERT (Post 7805695)
Still working man. The bearings have a pretty long lead time. I do have a set of coilovers here so that I can model both styles. The only difference is the interchangeable spring seat. Actually quite a few individual parts on these, but bearings and other production schedules holding me back.

No problem. Wasn't sure if it was going to happen or not but if your working on them I will be patient and wait.

2012LS3VERT 07-09-2014 10:17 PM

The dang bearings are a semi - special QA1 piece with a wide/short race, but is necessary for the Pfadt plates to be able to adjust like they do, with enough clearance to enable a no - drill installation. I really am working on them though. Hope to have the first prototypes in the next couple weeks.

CHMSC 07-09-2014 10:52 PM

Quote:

Originally Posted by 2012LS3VERT (Post 7805788)
The dang bearings are a semi - special QA1 piece with a wide/short race, but is necessary for the Pfadt plates to be able to adjust like they do, with enough clearance to enable a no - drill installation. I really am working on them though. Hope to have the first prototypes in the next couple weeks.

Very cool. I will be in Bama around that time.

2012LS3VERT 07-09-2014 10:54 PM

Where at? Give me a holler and I'll show you what I got going on with that and some other stuff in the shop if you got time.

CHMSC 07-09-2014 10:57 PM

I will be in Albertville but I will come through or close to Mobile on my way. Plus I will be going all over too so I should be in that area several times while I am there.

2012LS3VERT 07-09-2014 11:06 PM

Cool man. Just give me a holler on here. I'll be in Anniston the first 2 weeks of August, but I'll have my car. I always like checking out other modded Camaros.


All times are GMT -5. The time now is 10:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.