Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (http://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   Strut Tower Brace for 2010 (http://www.camaro5.com/forums/showthread.php?t=357180)

TwentyTen2SSRS 05-07-2014 02:48 PM

Strut Tower Brace for 2010
 
Anything out there that doesn't involve additional drilling?




Sent from my iPhone using Tapatalk 2

Dexman1349 05-07-2014 02:54 PM

I had to drill to install my Pfadt brace.

JDP Tyler 05-07-2014 03:02 PM

On the 10-early 11 you'll have to drill no matter what. The Hotchkis brace drills in the most inconspicuous places though.

https://fbcdn-sphotos-h-a.akamaihd.n...75177058_n.jpg

We have a full how-to write up on our JDP Facebook page. Feel free to call, PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007

TwentyTen2SSRS 05-07-2014 04:07 PM

How the heck do you get up in there? Do you have to remove springs and struts???


Sent from my iPhone using Tapatalk 2

Dexman1349 05-07-2014 04:08 PM

Mine had mounting points similar to the Hotchkiss. They installed with riv-nuts and everything was done from the top.

TwentyTen2SSRS 05-07-2014 04:18 PM

Dexman, really? No need to remove wheels springs etc? I'll have to look up install


Sent from my iPhone using Tapatalk 2

JDP Tyler 05-07-2014 04:34 PM

You do have to remove the struts or at least pull them out of the way. Here is the How-to link so you can get an idea.

Best regards,

Tyler
888-308-6007

Dexman1349 05-07-2014 04:55 PM

Mine was different than the Hotchkiss.

Here's what I have:
http://www.camaro5.com/forums/showpo...2&postcount=99

Jrichards73 05-08-2014 09:58 PM

Quote:

Originally Posted by Dexman1349 (Post 7645143)
Mine was different than the Hotchkiss.

Here's what I have:
http://www.camaro5.com/forums/showpo...2&postcount=99

:sad0147: ....Links to bar that is no longer available.....

Dexman1349 05-09-2014 09:49 AM

^^^ Yep, I bought it used here on C5 after Pfadt went under.

TwentyTen2SSRS 05-09-2014 10:12 AM

Bummer. I hear someone has one in the works now specifically for 2010 with no drilling


Sent from my iPhone using Tapatalk 2


All times are GMT -5. The time now is 12:59 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.