wheel size
 

hey guys,had a blowout friday,figured nows the time to bite the bullet and purchase new wheel/tires.im going with a non staggered setup.id like to go with a 20x10 wheel(looking at asanti).after searching through your forums i saw where people were going with a 20x10 wheel with a 38 degree offset.i have a 2011 ss stock height,id like as deep dish wheel as possible.asanti isn't set in stone.any ideas on wheels and tires would be greatly appreciated.

So before the cowboys come out shooting and ban you for posting in the wrong section, I'm just kidding?

Anyway are you looking in the Wheel and Tire section? I'm not saying the answer is there, but might try a post there.

Also, sometimes I google "Camaro5" and then the topic I'm looking for and it will pull up some suggestions.

I'm sure somebody on here will be able to chime in to.

If its an RS, the standard tire size that can fit the rim can range from a 20x7 to a 20x9 if I remember correctly. The front tires are smaller than the those on the rear. The front rims take a 20x8 and the rears take a 20x9.

this should be a sticky in the tire rack section

We have a tire and wheel section for a reason.

my apologies.ill head over to the tire/wheel section

Idk your budget, but Rennen has some sick wheels

whatever!
 

:emoticon1::paddle::frusty::sorry::threadjacked:

Ooh wait.. here come the tire section po po.

Watch out! You will get kicked off forum for posting in the wrong section! Just kidding. But some people do get pissed for some reason :iono:

Forgestar. 'Nuff said. Give ModBargains a call and talk to Jullian.

ok thanks