Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Cosmetics and Lighting Modification Discussions (http://www.camaro5.com/forums/forumdisplay.php?f=37)
-   -   Lingenfelter 2010 Camaro SS Body Enhancement Components Clay Modeling Process (http://www.camaro5.com/forums/showthread.php?t=37646)

Tim@Lingenfelter 08-16-2009 10:23 AM

Lingenfelter 2010 Camaro SS Body Enhancement Components Clay Modeling Process
 
6 Attachment(s)
As previewed on homepage.

Here are some pictures taken last month showing the clay modeling process underway by Lingenfelter for our 2010 Camaro SS body enhancement product line. More pictures will be posted as they become available. :D


Attachment 46724

Attachment 46725

Attachment 46726

Attachment 46727

Attachment 46728

Attachment 46729

ljustin293 08-16-2009 10:29 AM

:popcorn: not sure about the spoiler...need to see it finished I guess

SomeGeoffGuy 08-16-2009 10:33 AM

You need a double wing spoiler to match the double inlet hood...

-Geoff

SS 376 08-16-2009 11:50 AM

I'm not a designer, but I would suggest altering the angle of the slits in the hood to parallel the front lines of the car the same way the mail slot does. I love the rear spoiler though. :thumbup:

GJG 08-16-2009 11:53 AM

Quote:

Originally Posted by Can-Am (Post 804521)
I'm not a designer, but I would suggest altering the angle of the slits in the hood to parallel the front lines of the car the same way the mail slot does. I love the rear spoiler though. :thumbup:

:word:

Ringo 08-16-2009 12:37 PM

Clay modeling done by Hellen Keller. WTF? That looks pretty much like crap. Just adding another layer to the existing hood cowl looks pretty lame. To each his own.

Jferrell88 08-16-2009 08:41 PM

like the front bumper and side skirts, the spoiler makes me embarrassed for the people at legenfelter and the hood is pretty much crap as well

franknbeans 08-16-2009 09:08 PM

not feeling the spoiler at all.

Looks like a upside down and back wards visor.

JJ2010 08-16-2009 09:22 PM

The front spoiler is the best part.........

Cmlloveless 08-16-2009 09:36 PM

Nope! Just didn't hit with these mods!! Don't really like any of it!

PieNsky 08-16-2009 09:39 PM

Ummm.... The spoiler is different. Sorry, not feeling it.

1320junkie 08-16-2009 09:39 PM

ONe thing I know about Lingenfelter is that they are more function over form...so there is probably a reason for the looks...that being said I dont like the double slot hood cowl...lol

ZNOLMT 08-16-2009 11:21 PM

I like the hood! I wanna see the finished product though..

VALOR 08-16-2009 11:35 PM

Not a fan at all. I was expecting a bit more from a premier company.

JDBeck23 08-17-2009 12:31 AM

I dont understand the theme behind the design I guess. I dont care for the spoiler at all. It goes "out" way too far without going "up" enough for my liking.

The hood, I like the subtle take on increasing the "cowl" shape of the hood, but I think the scoops miss the mark completely.

The front lip isnt bad, but blatantly looks added on... I think the mantra for all ground effects should be "less is more"... the side skirts are even stranger, especially the rear section of the side skirts.

Im with Valor on this one, I think there should more of a theme going on, looks like it's just kinda putting things up on the Camaro "just to see" what they look like, I dont get a feeling that there's much a plan or goal in mind by looking at the clay moldings.

SummoneR 08-17-2009 12:42 AM

Quote:

Originally Posted by ljustin293 (Post 804354)
:popcorn: not sure about the spoiler...need to see it finished I guess

I like where this is going! BUt yeah the spoiler looks a little too big and thick, I love the factory Dovetail this is going for that look kind of but way to thick. I love that chin spoiler though!! NICE!

:popcorn:
Subscribed!

srevoal 08-17-2009 01:49 PM

Quote:

Originally Posted by Jferrell88 (Post 805957)
like the front bumper and side skirts, the spoiler makes me embarrassed for the people at legenfelter and the hood is pretty much crap as well

:word:

Capstone 08-17-2009 03:01 PM

Well if you can't say anything nice, my parents said... so I'll leave it at that...

Good thing it's only clay and it can be redone easily. I'd humbly suggest that an actual wing; not a Nascar-type "lip" is going to set off this body better, by breaking up the reverse-point that the ass-end of the car has. 99% of the pics of the Dale Spoiler (which everyone seems enamored with) actually looks very similar to this spoiler, just not as "thick" on the underside... I was hoping for a different direction.

Chief Mario 08-17-2009 05:05 PM

Quote:

Originally Posted by Can-Am (Post 804521)
I'm not a designer, but I would suggest altering the angle of the slits in the hood to parallel the front lines of the car the same way the mail slot does. I love the rear spoiler though. :thumbup:

Strongly agree :) it does however look :drool:

x1sniper3x 08-17-2009 08:01 PM

:popcorn: like it so far. not sure about the spoiler, but not bad :thumbsup:

BigMatt 08-17-2009 08:04 PM

Not a fan at all. Need to see it finished I guess

Revo1 08-17-2009 08:05 PM

I like this front lip over the GM kit, as it doesn't stick out 3 inches in front of the car. HOWEVER, I probably don't need to say much about that rear spoiler... :yikes:

BRobes05 08-17-2009 08:11 PM

yucky spoiler

2010_5thgen 08-17-2009 08:35 PM

looks like i found my new ground effects package and hood! that thing is gonna look sick! i love it.

Number 3 08-17-2009 08:55 PM

Have to hold judgement til it is finished, but somehow Corvette Summer came immediately to mind.


All times are GMT -5. The time now is 04:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.