Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 Bolt-Ons & Tunes (http://www.camaro5.com/forums/forumdisplay.php?f=78)
-   -   New low profile electric exhaust cutouts for your Camaro @ PFYC.com (http://www.camaro5.com/forums/showthread.php?t=40636)

Redshift 09-03-2009 09:45 AM

New low profile electric exhaust cutouts for your Camaro @ PFYC.com
 
New low profile electric exhaust cutouts now available from PFYC.com!

This oval-shaped, low profile, electronically controlled exhaust cutout means full control of your exhaust sound from the comfort and convenience of your driver seat. Designed for any car or truck that has limited ground clearance and anywhere from 2.25 inch to 3 inch exhaust pipe, this cutout will give you more sound, more performance, and not take up too much room under your car. With the Quick Time Electric Cutout you can have the best of both worlds -- quiet for the street and wide open for the drag strip, autocross, or racetrack. Go from stealth quiet to wide open power and experience gains even if you're already enjoying an aftermarket exhaust system. You control the volume and you control the power. Open your exhaust with the flip of a switch or using our optional electronic controller (sold separately). Run it closed, run it all the way open or any position in between. Even try adjusting your exhaust's back-pressure to find the optimal gas mileage if you are so inclined.

FEATURES:
  • Fits 2 1/4" to 3" Round Exhaust Pipes
  • CNC 6061 Aircraft Aluminum Body and Motor Plate
  • Stainless Steel Butterfly Plate and Shaft
  • Gears made from High Temp Steel for Long Life
  • High Torque DC Gear-Driven Motor (produces 1.5 ft-lb of torque)
  • Low Profile Design
  • Custom Illuminated Toggle Switch or Optional Controller
  • Weather Proof Wiring Harness and Connector with gold plated contacts
  • Made In the USA

Sample Power and Torque Gains:
  • 2010 Camaro SS: 18 horsepower and 17 ft-lb at 5500 RPM
  • Dodge Charger SRT-8 w/aftermarket cat-back already installed: 11 horsepower and 12 ft-lb across most of the RPM range

Please click below to go to the ordering page.


Quick Time Low Profile Oval Electric Exhaust Cutout


http://www.pfyc.com/mm5/graphics/new/gn5018.jpg
http://www.pfyc.com/supportfiles/gn5018_1.jpg
http://www.pfyc.com/supportfiles/gn5018_2.jpg
http://www.pfyc.com/supportfiles/gn5018_3.jpg



--------------


To see a full listing of our brand new items, please click here.
To see a full line-up of our current sales and specials, please click here.

DON_RAFA 09-03-2009 10:52 AM

Do you know if someone did this to the v6 camaro? I'd be interested if I heard it first just to make sure I don't have that "Honda" sound going on.

Redshift 09-03-2009 10:56 AM

The cutout is quite new - have not yet heard of anyone with a V6 doing it, but I can bet that there will be many who do it soon!

DON_RAFA 09-03-2009 11:07 AM

True. I only see 4th gen on YouTube with cutouts and they sound pretty good. I may have to take a chance with this.

Redshift 09-03-2009 11:11 AM

Quote:

Originally Posted by DON_RAFA (Post 879959)
True. I only see 4th gen on YouTube with cutouts and they sound pretty good. I may have to take a chance with this.

GM makes a sweet V6 these days - I bet it would sound very nice with the cutouts...but if you are not sure, its best to wait and catch some other people who post vids and sound clips first.

Camaro4Life2011 11-16-2010 08:58 PM

anyone every get any v6 sounds on this?

GreenMonster 03-07-2011 06:09 PM

BUMP, thinking about this setup for my v6 whats the feedback on this type of exhaust

Camaro4Life2011 03-07-2011 07:08 PM

double bump

redlich23 08-14-2014 04:19 PM

Got these put on my 2011 V6 RS. Sounds amazing!!!! I have BBK LT headers, Cold air intake, New Throttle Body,and tune. Will try to post a sound file


All times are GMT -5. The time now is 12:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.