Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro DIY & HOW-TO instructions & discussions (http://www.camaro5.com/forums/forumdisplay.php?f=67)
-   -   My 2SS With a few mods and CAI Do it yourself pics hope this helps (http://www.camaro5.com/forums/showthread.php?t=43848)

shawn18 09-22-2009 06:33 PM

My 2SS With a few mods and CAI Do it yourself pics hope this helps
 
10 Attachment(s)
Hey guys and gals i just installed a Gen5 Camaro Racing HAI "Thx Janetty" on my 2SS and thought i would include a few pics of the install to help anyone that may have some questions and also included are pics of my tint job and 67 Camaro emblems "thx ddunerider" stripes are coming tomorrow any questions feel free to pm me,Shawn

shawn18 09-22-2009 06:36 PM

2 Attachment(s)
and here are pics of the emblems and tint

shawn18 09-22-2009 06:46 PM

the steps are in order of the pics starting with the top left
1. Disconnect the negative battery cable
2.Disconnect th Mass Air flow sensor
3.Disconnect the factory air box 2 10mm nuts on the top
4.Remove the Mass Air flow electronics from the old air box
5.Install the sensor electrincs into the new intake
6.Remove the breather tube from the valve cover and install the new one
7.Install the new intake starting with the throttle body side and connect breather tube then the filter end and reconnect the battery and start the car and let it idle for a bit for the computer to adjust make sure all tools are out from under the hood"LOL" and you are done hope this helps the novice mechanic like myself

CWI 09-22-2009 07:29 PM

No box? How is this called a CAI?

JANNETTYRACING 09-22-2009 07:32 PM

Nice job on the pics and write up but that is a, HOT AIR INTAKE, HAI.

shawn18 09-22-2009 08:19 PM

thanks i was just about ask about that but didnt want to sound like a dummy guess that was inevetable,anyway thanks for clearing that up for me ;)

SILVER BULLITT 08-09-2010 04:21 PM

good ol HAI lol nice job though


All times are GMT -5. The time now is 03:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.