Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (http://www.camaro5.com/forums/forumdisplay.php?f=76)
-   -   Shift knob only - what is shifter diameter? (http://www.camaro5.com/forums/showthread.php?t=44726)

metaphysician 09-28-2009 08:28 AM

Shift knob only - what is shifter diameter?
 
I want to swap out the stock leather knob for a ball shift knob (don't want to spend the $$ on the shifter yet). I want to make sure I'm getting the right knob. Hurst's website has this one to fit 16mm x 1.50. Is this the correct stock shifter size?

http://www.hurst-shifters.com/hurst-...R-KNOB-6-SPEED

Thanks!

KILLER74Z28 09-28-2009 08:43 AM

3 Attachment(s)
The stock shifter is pressed on; you will need to find a pressed fit knob. Unless you remove the stock shifter and have it threaded... ;)

Attachment 58697

Attachment 58698

Attachment 58699

jpsuperman81 09-28-2009 08:43 AM

The stock knob is not threaded and I'm pretty sure most hurst knobs are, so just know you will have to do some tooling to the shaft and thread it. The stock knob just pulls off it doesnt screw off.

metaphysician 09-28-2009 09:04 AM

Thanks for the info and pictures! Do you know what the shifter diameter is? Maybe I'll have to find one that has those small pointed hex screws that bite into the shifter.


All times are GMT -5. The time now is 03:14 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.