Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) (http://www.camaro5.com/forums/forumdisplay.php?f=76)
-   -   KILLER's Camaro Hurst Billet/Plus Shifter Video (http://www.camaro5.com/forums/showthread.php?t=47780)

KILLER74Z28 10-17-2009 09:05 AM

KILLER's Camaro Hurst Billet/Plus Shifter Video
 
Okay, the weather was finally good enough to get a short video of me running the Hurst Billet/Plus Shifter through the gears... Enjoy! :)


ljustin293 10-17-2009 09:40 AM

noice :thumbsup:

Fast vette 10-17-2009 09:55 AM

Thanks KILLER, that's what I wanted to see, not that I had any doubts, but now I'm 200% shure I need a HURST.

cybergrey 10-17-2009 10:00 AM

Just got mine installed yesterday - now it feels SO much more like a sports car! love it!

SSOOCH 10-17-2009 10:09 AM

Great video. Did you do the Dynomat under the boot to cut out noise because that doesn't sound very loud to me :thumbsup:

KILLER74Z28 10-17-2009 10:20 AM

Quote:

Originally Posted by SSOOCH (Post 1055537)
Great video. Did you do the Dynomat under the boot to cut out noise because that doesn't sound very loud to me :thumbsup:

No, I did not and there is gear noise. I was not at full WOT. The noise really only shows its self from a dead stop to WOT while running through the gears... If you listen closely you can hear a little when I first take off. Really the noise is not that bad; only the picky Camaro owners will not care for it but that’s their right… :laugh:

2SSRS@Gen5diy 10-17-2009 10:30 AM

One picky Camaro owner, nice video and i dont know why hurst didn't put one out as we did it back 6-8-09 for the test drive.

Jeanius 10-17-2009 12:02 PM

Quote:

Originally Posted by KILLER74Z28 (Post 1055561)
No, I did not and there is gear noise. I was not at full WOT. The noise really only shows its self from a dead stop to WOT while running through the gears... If you listen closely you can hear a little when I first take off. Really the noise is not that bad; only the picky Camaro owners will not care for it but that’s their right… :laugh:

What is this noise you speak of? Is it present with the stock shifter because I don't hear NOTHIN!

Partick 10-17-2009 12:11 PM

I get a little noise with mine but nothing to be concerned about. Nice vid!!

KILLER74Z28 10-17-2009 12:12 PM

Quote:

Originally Posted by Jeanius (Post 1055844)
What is this noise you speak of? Is it present with the stock shifter because I don't hear NOTHIN!

At 18 seconds and then again at 40 when I accelerate at 3/4 throttle. You can hear what sounds like a small rattle.

TAG UR IT 10-17-2009 12:47 PM

HOLY CRAP, that is a SHORT throw!!!

Man, I can't wait to get mine!!!

SSOOCH 10-17-2009 01:38 PM

Ok, I'm sick. I've watched this video twenty times now. You'd think I'd just got get mine installed!! BTW Killer, what exhaust are you running, is that stock?

KILLER74Z28 10-17-2009 01:42 PM

Quote:

Originally Posted by SSOOCH (Post 1056085)
Ok, I'm sick. I've watched this video twenty times now. You'd think I'd just got get mine installed!! BTW Killer, what exhaust are you running, is that stock?

100% Stock... ;)

TAG UR IT 10-17-2009 02:03 PM

Dude...I can *hear* the rpm's in that thing. You NEED to slow down!:laugh:


All times are GMT -5. The time now is 09:57 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.