Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons (http://www.camaro5.com/forums/forumdisplay.php?f=11)
-   -   2010 Camaro LS3 does 632RWHP/630RWTQ!!!! Details/Pics/Videos Inside (http://www.camaro5.com/forums/showthread.php?t=54367)

Ron@Vengeance 11-30-2009 09:19 AM

2010 Camaro LS3 does 632RWHP/630RWTQ!!!! Details/Pics/Videos Inside
 
2010 Camaro Hennessey HPE 550
LS3/M6

Baseline #s were 506RWHP/501RWTQ
Modifications from HPE:
Magnuson TVS2300 (6psi)
Hennessey Cold Air Induction

Modifications while at Vengeance Racing Include:

Vengeance Racing
Custom Camshaft
Comp 26926 Dual Valvespring Kit
Hardened Pushrods
Katech C5R Timing Chain
Melling Oil Pump
American Racing 1 7/8 Longtubes with CATTED X pipe
KBB Boost Pump
Flow Matched/Balanced/Tested Fuel Injectors
Slightly smaller Pulley for the TVS2300 :D

New #s- 632 RWHP/630RWTQ

Here is the dyno graph before/after:
http://i88.photobucket.com/albums/k1...ng/scan-20.jpg

You Tube Video: Hot Start/Idle
http://www.youtube.com/watch?v=2X4Oe-hP9Lk


Short Drivability Video:
http://www.youtube.com/watch?v=ZT7P8nIqjvI


http://i88.photobucket.com/albums/k1...g/DSC06269.jpg

http://i88.photobucket.com/albums/k1...g/DSC06275.jpg

Sorry guys, no WOT videos on the street.. Customer was a bit nervous with all the new power/torque and wasnt ready just yet....

Atomic Autosports 11-30-2009 09:43 AM

looks great...can you provide part cost to us?

94guy 11-30-2009 10:50 AM

looks to have stock mufflers?

chappy48 11-30-2009 12:08 PM

I think all the Hennessey's come with Corsa exhaust. I wonder how much power that would make with a different intake?

navyblueSS 11-30-2009 01:50 PM

Nice, impressive numbers!!

Ron@Vengeance 12-01-2009 08:45 AM

Stock mufflers on this puppy...

Thanx guys!!!!

Carlos Garza 12-01-2009 09:43 AM

the one thing that I like is the 632 rwhp with only 6 psi... AWESOME!!! IMO, the car internals should be very safe with that amount of boost...

kelleyperformance 12-01-2009 09:57 AM

wow thats an impressive set of numbers! must be a great grind :)

Andro 12-01-2009 10:01 AM

Nice numbers

Crowley 12-01-2009 10:07 AM

Quote:

Originally Posted by Carlos Garza (Post 1233460)
the one thing that I like is the 632 rwhp with only 6 psi... AWESOME!!! IMO, the car internals should be very safe with that amount of boost...

I think it makes more than 6psi .. the initial numbers were on the 6psi ..


Great numbers guys!!

Crowley

kelleyperformance 12-01-2009 10:10 AM

Quote:

Originally Posted by Crowley (Post 1233528)
I think it makes more than 6psi .. the initial numbers were on the 6psi ..


Great numbers guys!!

Crowley

yeah but factor headers and a more than likely aggressive cam and youve got a fair amount of pressure loss. so going down a size or two on the pulley would produce the same overall pressure, but alot more airflow

94guy 12-01-2009 10:37 AM

well if the stock muffler can make that kind of power then no need to change them on a bolt on car unless you want sound.

PQ 12-01-2009 11:12 AM

I wanna do this before Chris. lmao

GTAHVIT 12-01-2009 11:14 AM

Quote:

Originally Posted by PQ (Post 1233853)
I wanna do this before Chris. lmao

;)



PM sent.... :thumbsup:

Ron,

Ignore the part about Junkie.... LMAO... Kinda threw him under the bus there....


:D


All times are GMT -5. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.