Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Suspension / Brakes / Chassis (http://www.camaro5.com/forums/forumdisplay.php?f=93)
-   -   MTI, Pfadt, Hotchkis or Pedders sway bars (http://www.camaro5.com/forums/showthread.php?t=61674)

flht99b 01-20-2010 10:28 AM

MTI, Pfadt, Hotchkis or Pedders sway bars
 
Looking for real world experience with the MTI, Pfadt, Hotchkis and Pedders front are rear sway bars on the 2010 SS Camaro. Do the Hotchkis bars have welded in, machined ends or the flattened bar material like the Eibachs ?? I'm retaining the stock springs and OEM staggered 20x8 and 20x9 wheels and 245 front and 275 rear tires. Ed M.

lawdogg149 01-20-2010 11:43 AM

It got the perfect setup. pfadt sways and BMR chassis brace. I have ran my car twice at Road Atlanta and also at the great Sebring in Florida. No problem running with the exotics and Z06's. MTI sways look identical to the pfadt sways. Pfadt sway bars made the best improvement to my cars handling.

flht99b 01-20-2010 01:13 PM

Thanks lawdogg179. are you still running the stock springs ?? Ed M.

lawdogg149 01-20-2010 04:39 PM

For now waiting on final pricing for Pfadt coilovers if not right I will be putting the KW3's on. Car handles really well though with stock shocks and springs. I just need a little adjustabilty for the racing I do.

urr2slo 01-20-2010 05:45 PM

I'VE GOT HOTCHKIS ON FOR ABOUT 4K MILES, MADE A HUGE DIFFERENCE AND I LIKE THE ADJUSTABILITY. CURRENTLY DOING THERE CHASSIS BRACE AND SPRINGS AS WE SPEAK. GREAT QUALITY AND MADE HERE IN THE USA.

IPS Brandon 01-21-2010 10:06 AM

Quote:

Originally Posted by flht99b (Post 1398297)
Looking for real world experience with the MTI, Pfadt, Hotchkis and Pedders front are rear sway bars on the 2010 SS Camaro. Do the Hotchkis bars have welded in, machined ends or the flattened bar material like the Eibachs ?? I'm retaining the stock springs and OEM staggered 20x8 and 20x9 wheels and 245 front and 275 rear tires. Ed M.

The only bars I am aware of that have welded, versus pinched steel ends are Pfadts. And Pfadts Rear bar has three different settings for adjust-ability.

http://www.pfadtracing.com/photos/da...0-sway-1c1.jpg

You will see a drastic reduction in understeer, and increased friction patch on the tires with these bars!

Good luck

flht99b 01-21-2010 02:25 PM

MTI bars have welded ends also, seen them in person. What can I purchase Pfadt bars shipped to my door for ?? zip 37934. Ed M.


All times are GMT -5. The time now is 08:40 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.