Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Member Car Journals (http://www.camaro5.com/forums/forumdisplay.php?f=50)
-   -   [COTW 4/4/10]: JRPXXII is finally DONE...SWEEEEEET (http://www.camaro5.com/forums/showthread.php?t=70132)

jrpxxii 01-21-2010 10:29 AM

[COTW 4/4/10]: JRPXXII is finally DONE...SWEEEEEET
 
Featured as Camaro-of-the-Week 4/4/10

When I first got my car I did some upgrades and now it is time to finish it out just in time for Camaro5fest. Here is a list of what was done to the car when I first got it:
2010 Camaro SS/RS IOM w/IOM interior
21" factory Silver/Black wheels
Black rally stripes
Black Hockey stripes
Black fade gill decals
Supercharged emblems
TVS2300 supercharger
FAST 65lb injectors
Comp Cams 220/228.581"/.588" 114LSA+3
Precison Race Components 650 lift spring kit/titanium retainers, seats and seals
Texas Speed 7.40 Chromemoly pushrod
Ported/Shimmed LS6 oil pump
160 Thermostat
N-Motion double roller LS2 timing set 4x Cam gear
ARP Camshaft bolt
Kenne Bell Boost-a-Pump kit
ARH Long tube headers/no cats
Borla axle back S type mufflers
NGK TR6 Plugs
ADM Race Intake
Subthump 12" sub box
Subthump Amp w/amp rack
12" JL W7
MTI short shifter
Eibach front/rear sway bars
Eibach Pro Kit springs

And now here is the newest additions:

418 cubic inch fully forged bottom end
Aggressive blower cam
Ported/Polished LS3 heads
Upgraded valves
ZEX nitrous kit w/bottle warmer and purge kit
Snow Peerformance methanol injection kit
Pfadt motor mounts
Fidanza 7.6 clutch
Fastlane Dual Pump fuel system
65lb fuel injectors
12psi on TVS2300
20x11 rear 20x10 front Iconz 830zr wheels
Nitto drag radials
AAC LED fog lights
AAC Afterbutner taillights
AAC Footwell lights
Spohn Toe end links
Spohn trailing arms
BMR tunnel brace
BMR chassis brace
GForce 300mm HD Axles
Mosler Gauge Dual Pod mount
Aeroforce Dual Interceptor gauges
Innovators West 8 rib pulley set w/10% overdrive
SJM Line lock kit
Calipers IOM matched
Heritage Grille painted IOM


http://www.camaro5.com/forums/attach...1&d=1269125656 http://www.camaro5.com/forums/attach...1&d=1269125656 http://www.camaro5.com/forums/attach...1&d=1269125656 http://www.camaro5.com/forums/attach...1&d=1269125656 http://www.camaro5.com/forums/attach...1&d=1269125656 http://www.camaro5.com/forums/attach...1&d=1269125656 http://www.camaro5.com/forums/attach...1&d=1269125656 http://www.camaro5.com/forums/attach...1&d=1269125656 http://www.camaro5.com/forums/attach...1&d=1269125656 http://www.camaro5.com/forums/attach...1&d=1269125656


http://www.camaro5.com/forums/attach...1&d=1269130649


http://www.camaro5.com/forums/attach...1&d=1269131176



http://www.camaro5.com/forums/attach...1&d=1268349004 http://www.camaro5.com/forums/attach...1&d=1268349004 http://www.camaro5.com/forums/attach...1&d=1268349004 http://www.camaro5.com/forums/attach...1&d=1268349004 http://www.camaro5.com/forums/attach...1&d=1268349004 http://www.camaro5.com/forums/attach...1&d=1268349004 http://www.camaro5.com/forums/attach...1&d=1268349004 http://www.camaro5.com/forums/attach...1&d=1268349004

ljustin293 01-21-2010 10:30 AM

heck of a list!! can't wait to see it!

herkman 01-21-2010 03:39 PM

1 Attachment(s)
Attachment 87804

Mayhem Matt 02-02-2010 04:04 PM

WOW nice almost exactly what I want to do to mine less a couple things! Good JOB!!!

Qwkss 02-02-2010 04:27 PM

WOW!! Very Cool!!! Post up a video or Dyno numbers!!!:headbang:

jrpxxii 02-02-2010 05:04 PM

It is on its way to Texas-Speed & Performance right now and it will be a week or so before it is all done and tuned. I will post pics when I get it back and won't be running it til Spring, but will get some good vids of it on the street.

Gotthat02fire 02-02-2010 05:33 PM

I'm guessing your waiting on some wheels!!!!!!!!!!!!!!!!!!!LOL!!!!!!!!!!

brandotron 02-02-2010 05:36 PM

Quote:

Originally Posted by Gotthat02fire (Post 1441676)
I'm quessing your waiting on some wheels!!!!!!!!!!!!!!!!!!!LOL!!!!!!!!!!

I was also quessing, but I took some I took some Imodium and now I'm fine.

Indpowr 02-02-2010 05:42 PM

Humm, looks like your a performance guy

Gotthat02fire 02-02-2010 05:54 PM

ROMALOL wronge button!!!!!



Quote:

Originally Posted by brandotron (Post 1441688)
I was also quessing, but I took some I took some Imodium and now I'm fine.


jrpxxii 02-02-2010 08:32 PM

A big thanks to Gotthat02fire for coming thru with wheels/tires. I will soon have that asphalt chewing machine back in my garage.

jrpxxii 02-06-2010 06:17 PM

My car arrived at Texas Speed & Performance yesterday and should be back in about a week. Will post up what it dynoed after everything is done. My new Iconz wheels will be here next week also. All I got to do is get it to the track and get it dialed in.

Gotthat02fire 02-09-2010 01:00 PM

:popcorn::popcorn::popcorn::popcorn::popcorn::

2010 SSRS 02-09-2010 01:02 PM

Awesome Camaro

BLKLIST 02-09-2010 01:26 PM

Nice build, hope to see the results and some pics soon :)

Codefive 03-06-2010 06:21 AM

Update ???

BTW ... if your car is still in Tx, check with Owen at ARD. He had a nice snug fit rollbar in his car at Memphis. I'm certain the same guy could handle your cage requirements while the car is there.

Fabrice 03-07-2010 05:17 PM

great post.

jrpxxii 03-09-2010 10:22 PM

JRPXXII is finally DONE...SWEEEEEET
 
Just got the call from Jason @ Texas Speed & Performance who has had my car for the past month as it took awhile to get certain parts. This is like a kid waiting for Christmas morning as it will be here tomorrow. It dynoed at 725hp and 740torque to the rear wheels without the methanol and no nitrous, so it should easily be at the 900+hp level I was looking for and intend to use. Below is the history of what the car has developed from and where it is now. I will take lots of pics and post as soon as I can as I already know "this thread is useless without pictures" but be assured you will see pics as soon as I get car back. Here is what the car built too:

2010 Camaro SS/RS IOM w/IOM interior
21" factory Silver/Black wheels
Black rally stripes
Black Hockey stripes
Black fade gill decals
Supercharged emblems
TVS2300 supercharger
FAST 65lb injectors
Comp Cams 220/228.581"/.588" 114LSA+3
Precison Race Components 650 lift spring kit/titanium retainers, seats and seals
Texas Speed 7.40 Chromemoly pushrod
Ported/Shimmed LS6 oil pump
160 Thermostat
N-Motion double roller LS2 timing set 4x Cam gear
ARP Camshaft bolt
Kenne Bell Boost-a-Pump kit
ARH Long tube headers/no cats
Borla axle back S type mufflers
NGK TR6 Plugs
ADM Race Intake
Subthump 12" sub box
Subthump Amp w/amp rack
12" JL W7
MTI short shifter
Eibach front/rear sway bars
Eibach Pro Kit springs

And now here is the newest additions:

418 cubic inch fully forged bottom end
Aggressive blower cam
Ported/Polished LS3 heads
Upgraded valves
ZEX nitrous kit w/bottle warmer and purge kit
Snow Peerformance methanol injection kit
Pfadt motor mounts
Fidanza 7.6 clutch
Fastlane Dual Pump fuel system
65lb fuel injectors
12psi on TVS2300
20x11 rear 20x10 front Iconz 830zr wheels
Nitto drag radials
AAC LED fog lights
AAC Afterbutner taillights
AAC Footwell lights
Spohn Toe end links
Spohn trailing arms
BMR tunnel brace
BMR chassis brace
GForce 300mm HD Axles
Mosler Gauge Dual Pod mount
Aeroforce Dual Interceptor gauges
Innovators West 8 rib pulley set w/10% overdrive
SJM Line lock kit
Calipers IOM matched
Heritage Grille painted IOM
I think this has it covered but I may have over looked something. Look forward to seeing and meeting everyone at Camro5Fest.

BlessedChef10 03-09-2010 10:25 PM

WooooooooooW! Awesome

Mindz 03-09-2010 10:29 PM

Good lord. I wish I had that much money to spend on the car right away. That thing is a beast. I pray you don't lose control. :thumbsup:

Indpowr 03-09-2010 10:29 PM

There is a lot of your posts on your car yet not one photo...Show it or I do not believe it ;)

Camaro21 03-09-2010 11:18 PM

DANGGGGGGGGGGG

jrpxxii 03-10-2010 07:06 AM

Oh Indpowr, now now, as I said above, lots of pics to come. It is on the trailer, headed to KY as I type and it is about a 14 hour drive, so it will be tonight before it gets here, so I will have pics up Thursday of every detail for the non-believers here.

Indpowr 03-10-2010 07:09 AM

Quote:

Originally Posted by jrpxxii (Post 1569406)
Oh Indpowr, now now, as I said above, lots of pics to come. It is on the trailer, headed to KY as I type and it is about a 14 hour drive, so it will be tonight before it gets here, so I will have pics up Thursday of every detail for the non-believers here.

Oh, I believe but do not care as much without the photos...:sm0:

When I had work done out of state, I always made them send me progress work photos..:yikes:

2010 SSRS 03-10-2010 07:11 AM

Awesome, can't wait to see pics and videos.


All times are GMT -5. The time now is 11:10 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.