Latest Camaro Products - March 2010
Latest Aftermarket Performance Parts & Accessories for the 2010 Camaro
March 13th, 2010 - Dallas, Texas
We traveled to Dallas last weekend to check out some of the latest aftermarket performance products at the private Keystone Big Show and wanted to give everyone a look at what's on the market for 2010, check them out below! We also got to spend some time with some of the guys over at DiabloSport going over everything they have to offer for the 2010 Camaro SS and V6 models - and they have some pretty cool announcements coming very soon - stay on the lookout!
DiabloSport's Predator, Trinity, and the NEW 'InTune' Programmers/Custom Tuners
The ever-trusted Diablo Predator tuner, and the newer Trinity T-1000 that has all the same features of the Predator unit, plus a wide range of extra features like Live data logging, and much more. NEW for DiabloSport in 2010 is their "inTune" product - a totally new way to tune your 2010 Camaro!!
K&N's Cold Air Intake for the 2010 Camaro SS
The 69 Series 'Typhoon" Kit - K&N claims +18.12 HP gains @ 5200 RPM. This is a mandrel-bent aluminum tube with a polished finish (not chrome). These units are also available in a black plastic finish from K&N.
Flowmaster's Cat-Back and Axle-Back Exhaust Systems
Flowmaster's 3" Exhaust Kit for the 2010 Camaro consists of their Classic 40 Series mufflers to give you that loud, raspy exhaust tone you are looking for! Available in an Axle-Back and Cat-Back Complete Kit! *Specifically designed for the 2010 Camaro using EXCLUSIVE mufflers from Flowmaster - you can't get these off the shelf by themselves!
Magnaflow's Complete Cat-Back Exhaust Systems!
A special feature on Magnaflow's Exhaust Kit for the 2010 Camaro SS is the Built-In X-Pipe in the center-muffler right behind the transmission. Not only does this help generate the best sound quality possible, it also helps free up that extra horsepower! (Shown with BMR Chassis Brace and Eibach Sway Bars (Front & Rear) installed).
MBRP's 2010 Camaro Exhaust System
MBRP's Complete 3" Cat-Back Exhaust system for the 2010 Camaro includes a Lifetime Warranty. Look for gains of up to 20 RWHP and 24 Ft-Lbs of Torque at the wheels!
Borla's 2010 Camaro Exhaust System
Shown above is Borla's new ATAK series muffler that is audio-engineered for the 'perfect' sound for each vehicle. Look out for these in the future!
Corsa's 2010 Camaro Exhaust Systems
A cool look at Corsa's patented muffler design. Corsa offers a full line of complete cat-back Exhaust Systems for the 2010 Camaro SS and LS/LT
Hedman Headers' Shorty Headers for the 2010 Camaro
New 1-3/4" Shorty Headers in 304 Stainless Steel - available Ceramic-coated, or uncoated. #62566
Vortech's Supercharger Kit for the 2010 Camaro SS
Rated at 625 Horsepower (upgradable to 1200 horsepower), Air to Air intercooled, Comes with a billet ATI Balancer and 10 rib belt for better belt tension
Edelbrock's E-Force Supercharger for the 2010 Camaro SS
The brand new Edelbrock E-Force Supercharger features the same high-quality Eaton rotos as the Magnuson TVS2300 units. This Edelbrock supercharger has 12 inch long intake runners and comes with a 5 year, 100,000 mile warranty. Available in a Street Legal Kit, as well as Competition Kit for bigger builds. Look for these to be available some time around April/May 2010. Fits under your stock hood. #1597, #1598, #1599Horsepower and Torque numbers coming very soon...
Motive Gear's new gear sets for the 2010 Camaro
Coming soon, available in 3:90 and 4:11 gear ratios.
StopTech's upgraded Brake Calipers and Rotors for the 2010 Camaro
Coming soon for the 2010 Camaro
FAST's 102mm LSXR Intake Manifold
Includes interchangable intake runners and you can also port widen the intake runners for complete custom setups
JET's Mass Air Flow sensor upgrade for the 2010 Camaro SS
Increased throttle response, Increased mid range horspower, Works great with Aftermarket Air Inductions, Easy to install in minutes
Grant's new custom Steering Wheel for the 2010 Camaro - coming soon!
Grant is now working on a new line of products for late model muscle cars that will allow you to transfer over your stock airbag for your street car!
ACT's new Clutch & Flywheel for the 2010 Camaro
850 to 1450 torque capacity, Twice the size of the stock clutch's surface area for better clamping force and heat reduction. ACT's twin disc Pressure Plate is 10.5". Overall weight with two street discs is 36.25lbs (stock is 57.00 lbs), Balance tolerance is .75 in. ounce (stock is 3.25 in. ounce). Street version - ACT Performance Solid Hub Street Disc (organic lining with high copper content). Race version - ACT 6 Puck Solid Hub Race Disc (ceramic/metallic lining materials)
Love the steering wheel! Would also love to supercharge!!
OMG, Sean, I love you! ... errr... in a manly, back slapping kind of way. *cough*
AWESOME post!!! :thumbsup: Thanks for those pics! Very well done! :drool:
Yeah that steering wheel looks pretty interesting
What splitter is that on the silver Camaro?
makes my mouth water.neat stuff. like that steering wheel also.
I like the steering wheel too! I need more $ for all these goodies..
I'm getting the magnaflow cat-back in a month or two, Fishtail's video sold me with my V6; it makes it sound so much better and run so much cleaner. http://www.youtube.com/watch?v=yRX24JWy11o
Steering wheel looks sweet too!
Love that look of the exhaust.
That steering wheel is AWESOME bet its 500.00:mad0259:
I want that "Intune" unit... but I cant find any info on it.... not even on the diablosport website.
It should be coming very soon though.
I should be able to post some updated info on the inTune this week... I will keep everyone updated!
|All times are GMT -5. The time now is 09:59 AM.|
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.