Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro Photos | Spyshots | Video | Media Gallery (http://www.camaro5.com/forums/forumdisplay.php?f=3)
-   -   Lowered my SS Today (http://www.camaro5.com/forums/showthread.php?t=87304)

boatingbent 06-02-2010 09:16 PM

Lowered my SS Today
 
1 Attachment(s)
Before

boatingbent 06-02-2010 09:17 PM

1 Attachment(s)
After

egad09 06-02-2010 09:17 PM

After? ...:paddle:

Nevermind there it is!!! Looking good!!

boatingbent 06-02-2010 09:17 PM

1 Attachment(s)
Before

dmax86 06-02-2010 09:18 PM

did it change the ride comfort? is it stiffer?

boatingbent 06-02-2010 09:20 PM

3 Attachment(s)
This Site is to fast for me I guess I will post all the Before shots 1st and then the after shots 2nd

boatingbent 06-02-2010 09:22 PM

3 Attachment(s)
After......

MillerTime 06-02-2010 09:23 PM

niiice. did you have a shop do it? I'm debating weather or not to do it myself depending on how much these places are charging to do it..

oldfriend 06-02-2010 09:24 PM

Locking A1 man i have to ask you guys this i am on the fence to install a set of 20x8.5 and 20x10 matte blk DONINGTON from TSW AND WANDER if there is someone that already did or seen this ones on the camaro and if there is some issues that i should be awere of . thank you for the info ESS

Kinetic Kev HWSE 2013 06-02-2010 09:25 PM

Looks good, I love that look of a lowered car

boatingbent 06-02-2010 09:25 PM

Did run into one problem ...The Foose legend 22`s has 2 Valve stems ..The valve stem on the back side of the wheel would hit the E Brake Cable making a Ticking sound ......I fixed it with some wire ties for now but will have to come up with a better solution ....Only put on about 30 miles since Install but everything seams A Ok

boatingbent 06-02-2010 09:28 PM

Quote:

Originally Posted by MillerTime (Post 1938368)
niiice. did you have a shop do it? I'm debating weather or not to do it myself depending on how much these places are charging to do it..

Yes i had a shop do it ....it was the owner of the shop that ended up doing the work so he was answering phone calls and what not so its hard for me to say how long it took but I am guessing with the install and alignment 4 maybe 5 Hours...Can`t tell you how much he charged me cause i left without paying:laugh::facepalm:

dreamst8 06-02-2010 09:55 PM

Can you give any details if its easy enuff to do it yourself or recommend only a shop? The Vettes are easy, couple nuts and bolts moving and Presto!

boatingbent 06-02-2010 09:59 PM

Looked easy enough to me ......Couple of times I had to help him put bolts in while he lined things up....I did not watch them put the new Springs into the Struts so I can`t help you there.....I know you can do it on Jack Stands but a lift would be the best for sure


All times are GMT -5. The time now is 08:27 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.