Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Forced Induction - V6 (http://www.camaro5.com/forums/forumdisplay.php?f=98)
-   -   So what 1/4 times you expecting with a Turbo? (http://www.camaro5.com/forums/showthread.php?t=91298)

Maurdib 06-23-2010 05:27 PM

So what 1/4 times you expecting with a Turbo?
 
So if STS pan's out and we get 505hp at the crank, what's are realistic 1/4 time we should be looking forward to?

rhd 06-23-2010 05:42 PM

LOW LOW 13's or high 12's i would think

MichaelH 06-23-2010 05:49 PM

i would acutally say mid 12s seeing how the ss with 426 alrdy runs 12.8-13 so since the v6 is lighter and have 505 hp i could see mid 12s happening

Maurdib 06-23-2010 05:56 PM

Quote:

Originally Posted by MichaelH (Post 2019310)
i would acutally say mid 12s seeing how the ss with 426 alrdy runs 12.8-13 so since the v6 is lighter and have 505 hp i could see mid 12s happening

Winter/Fall run or Summer run?

MichaelH 06-23-2010 06:15 PM

i would def say it would happen in the winter/fall run but summer it may jus depend on the day, track, temp, all of that will effect it but even in the summer it shld still see 12's thats my 2 cents

The_Blur 06-23-2010 06:16 PM

I could get a turbo now and not see any improvement. First, I'd need some piping. I'm sure I'm forgetting something.



























I know! We need a tune! :confused0068: :laugh:

MichaelH 06-23-2010 06:18 PM

yea that is the big thing we need no tune no turbo or blown engine

Quote:

Originally Posted by The_Blur (Post 2019445)
I could get a turbo now and not see any improvement. First, I'd need some piping. I'm sure I'm forgetting something.


























I know! We need a tune! :confused0068: :laugh:


devildoc 06-23-2010 06:26 PM

I say that with my setup I'm look at low 12s. I already have the tune in place and ready and the long tube headers + high flow cats. This set up with a larger diameter exhaust, would allow freer flowing exhaust gases to spool up the turbo faster. Shoot at 0 dA the estimate is 13.85 in the 1/4mile. I also have planned some extensive weight reduction. Watch out ya'll!

deljaso 06-23-2010 07:04 PM

Quote:

Originally Posted by devildoc (Post 2019489)
I say that with my setup I'm look at low 12s. I already have the tune in place and ready and the long tube headers + high flow cats. This set up with a larger diameter exhaust, would allow freer flowing exhaust gases to spool up the turbo faster. Shoot at 0 dA the estimate is 13.85 in the 1/4mile. I also have planned some extensive weight reduction. Watch out ya'll!


:threadjacked:

Where are you gonna drop weight?

rhd 06-24-2010 04:44 AM

:threadjacked::threadjacked: +1
Quote:

Originally Posted by deljaso (Post 2019610)
:threadjacked:

Where are you gonna drop weight?


devildoc 06-24-2010 06:53 AM

Quote:

Originally Posted by deljaso (Post 2019610)
:threadjacked:

Where are you gonna drop weight?

Sorry I can't disclose that yet. I have a fabricater that is working with me on some basic weight reductions that should put me close to 200lbs lighter than stock weight at the very minimum. If it works he wants to start selling the product.

Maurdib 06-24-2010 11:08 AM

Quote:

Originally Posted by devildoc (Post 2021144)
Sorry I can't disclose that yet. I have a fabricater that is working with me on some basic weight reductions that should put me close to 200lbs lighter than stock weight at the very minimum. If it works he wants to start selling the product.


Cool keep us updated

devildoc 06-24-2010 12:46 PM

Will do.....can't wait to see what happens. Unfortunately I will be doing alot of moving and such so it will take longer than expected between shipping the items. He has already taken the measurements and molds. I hope things work out also.

Maurdib 06-24-2010 12:57 PM

Quote:

Originally Posted by devildoc (Post 2022225)
Will do.....can't wait to see what happens. Unfortunately I will be doing alot of moving and such so it will take longer than expected between shipping the items. He has already taken the measurements and molds. I hope things work out also.

Me too, because the other weight reduction methods are a bit silly to me even though they do work

69 Rebel 06-24-2010 06:35 PM

Subscribed!!! Keep us posted

67 GTO 06-24-2010 06:40 PM

Hmmmm, STS has a distributer not to far from me. Could be my next bolt on. :)

scrming 06-26-2010 07:53 AM

Should be in the 11's...

I know of at least one 4.0 V6 Stang running 11's with a turbo on a stock motor... I was 12.85 with just over 300 RWHP in my 4.0...

SILVER BULLITT 08-05-2010 11:32 PM

mid to low 12s all day

SILVER BULLITT 08-05-2010 11:33 PM

oh wait your a v6 i dont know what your stock gears are ? 32x ?


All times are GMT -5. The time now is 11:49 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.