Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (http://www.camaro5.com/forums/index.php)
-   Camaro Issues / Problems | Warranty Discussions | TSB and Recalls (http://www.camaro5.com/forums/forumdisplay.php?f=70)
-   -   SQUEAK/BIRD CHIRP SOUND IN DRIVERS SEAT!!!!! (http://www.camaro5.com/forums/showthread.php?t=98928)

klondike 08-05-2010 02:28 PM

SQUEAK/BIRD CHIRP SOUND IN DRIVERS SEAT!!!!!
 
I have this annoying bird chirping/sqeauk in the driver's seat. I've taken it to my dealer twice, this time they even called GM for advice. They spent an entire day trying to fix it, STILL not fixed!!!!! Has anyone else had this problem and can steer me, more importantly, my dealer in the right direction to fix this????

I have the synergy green camaro, a friend of mine has a LS...we both have the problem. My mom has a 2LT, no problem.

Any advice?????????????

bluedevil02 08-05-2010 02:34 PM

turn ur radio up, cars will always make weird noises...

LittleMT 08-05-2010 02:43 PM

I get a slight clunking sound in my 2011 in my drivers seat, I found by slightly adjusting it, the sound went away, and yes, crank up the ROCKABILLY and with the slap back echo and upright bass fiddle thumpin, I hear nothing but Heaven Daddy-o...

mcarney 08-09-2010 10:22 PM

Its the seatbelt. If you push it forward it will go away. Super annoying... couple of posts on it. I think someone sprayed wd40 in the seat belt and it stopped for them.

hummerman 08-10-2010 01:13 PM

I get this aswell..........sickening!!!
Also get alot of driveline slack noise when lugging the engine.....

Ronn 08-10-2010 03:40 PM

I had a little squeak like that the other day, it was hard to replicate. Seemed when I would accelerate my body would get pushed back and that's when it happened. No idea where it was coming from.

klondike 08-11-2010 04:30 PM

Yeah, I think it's the seatbelt. Thanks. And I have many cars, new and old, I know normal sounds vs. abnormal! This isn't normal and is annoying as he**!!!!!

Coldpants 08-11-2010 06:12 PM

Stop smuggling birds in your pants!!!!
http://www.tampabay.com/multimedia/a...709_67224d.jpg

crazy cat 08-12-2010 06:07 PM

check this out.
xTooltipElement

http://www.camaro5.com/si/images/gmLogoFlat.gif Service Information
http://www.camaro5.com/si/images/bhome.gif http://www.camaro5.com/si/images/bpublication.gif http://www.camaro5.com/si/images/bnumsrchbutton.gif http://www.camaro5.com/si/images/bnews.gif http://www.camaro5.com/si/images/ymkbutton.gif http://www.camaro5.com/si/images/feedback.gif http://www.camaro5.com/si/images/bhelp.gif

2010 Chevrolet Camaro | Camaro (VIN F) Service Manual | Document ID: 2287946
#09-08-50-009A: Scraping/Moaning/Creaking Noise from Front Seats (Apply Lubricant) - (Jun 4, 2009)

http://www.camaro5.com/image_en_us/g.../999999995.gif
Subject:Scraping/Moaning/Creaking Noise from Front Seats (Apply Lubricant)

Models:2010 Chevrolet Camaro


This bulletin is being revised to add the driver's six-way power seat creak condition. Please discard Corporate Bulletin Number 09-08-50-009 (Section 08 - Body and Accessories).
<A href="#ss1-2287946">Condition

Some customers may comment about a scraping or moaning type noise coming from the front of the front seat track area. This condition occurs when the seat assembly is being cycled into the full forward position. Some customers may also comment about a creaking noise coming from the driver's six-way power seat when it is in the full rearward position. This condition only applies to six-way power seats.
<A href="#ss2-2287946">Cause

This scraping or moaning condition may be caused by the seat position sensor (SPS) making contact with seat position sensor target bracket. This contact is made in the lead in area of the SPS. This contact area controls the function of the SPS. The drivers seat creaking condition may be caused by the lack of lubricant in the rear of the drivers seat track assembly.
<A href="#ss3-2287946">Correction

The application of a lubricant to the contact area of the components will eliminate the noise. Use the following steps to apply lubricant to the seat position sensor target bracket, located on the inner seat track and to the rear of the drivers seat tracks.
  1. <LI type=1>Move the seat assembly to the rearmost position. <LI type=1>Locate the seat position sensor target bracket on the seat inboard track. <A href="#oth4-2287946">Passenger Seat Position Sensor Target Bracket Location


    http://www.camaro5.com/image_en_us/g...78/2278245.gif
    http://www.camaro5.com/forums/images/tif.gif
    <A href="#oth5-2287946">Passenger Seat Position Sensor Target Bracket


    http://www.camaro5.com/image_en_us/g...78/2278247.gif
    http://www.camaro5.com/forums/images/tif.gif
    <A href="#oth6-2287946">Driver Seat Position Sensor Target Bracket Location


    http://www.camaro5.com/image_en_us/g...78/2278249.gif
    http://www.camaro5.com/forums/images/tif.gif
    <A href="#oth7-2287946">Driver Seat Position Sensor Target Bracket


    http://www.camaro5.com/image_en_us/g...78/2278253.gif
    http://www.camaro5.com/forums/images/tif.gif
    <LI type=1>Apply a thin coating of Super Lube with PTFE, GM P/N 12371287 (in Canada, use P/N 10953437), or the equivalent, to the top and bottom of the driver and passenger seat position sensor target bracket. Coat the full length of the bracket and ensure the coating extends at least 10 mm (0.40 in) from the edge of the bracket as shown. <LI type=1>Cycle the seat to the full forward position and verify the concern is corrected.
    http://www.camaro5.com/image_en_us/g...85/2285152.gif
    http://www.camaro5.com/forums/images/tif.gif
    <LI type=1>With the drivers seat in the full forward position, locate the rear of the inboard and outboard seat tracks.
    http://www.camaro5.com/image_en_us/g...85/2285155.gif
    http://www.camaro5.com/forums/images/tif.gif
    <LI type=1>Using a small screwdriver, pry off the two seat track end caps.
    http://www.camaro5.com/image_en_us/g...85/2285157.gif
    http://www.camaro5.com/forums/images/tif.gif
    <LI type=1>Apply a thin coating of Super Lube with PTFE, GM P/N 12371287 (in Canada, use P/N 10953437), or the equivalent, to the front side of the two stop tabs identified by the arrows, as shown. Repeat the application on the second seat track. <LI type=1>Insure the lubricant covers the area where the lower stops make contact with the upper seat track stops.
  2. Clean up any excess lubricant and reinstall the two seat track end caps.
<A href="#ss8-2287946">Parts Information

Part Number
Description
12371287 (U.S.)
10953437 (Canada)
Super Lube with PTFE
<A href="#ss9-2287946">Warranty Information

For vehicles repaired under warranty, use:
Labor Operation
Description
Labor Time
C9892*
Lubricate Driver And Passenger Seat Position Sensor Bracket
0.2 hr
Add
Lubricate Power Seat Track
0.1 hr
* This is a unique labor operation for bulletin use only. It will not be published in the Labor Time Guide.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.

http://www.camaro5.com/image_en_us/g.../999999994.gif WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION
2010 General Motors. All rights reserved.

klondike 08-19-2010 09:11 AM

Fixed!
 
Thanks for the download on instructions to fix! Dealer used them and fixed the problem!

SnMcGrew 08-25-2010 01:51 PM

I have the same problem i took it to my dealer and they said the center console was loose and for me to bring it back so they can fix it, but i have not had time to do that yet. You might want them to check that out.


All times are GMT -5. The time now is 02:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.