Just testing if there is any interest in the slightly damaged OE splitter from my 2013 1LE.
It is taking up room in my shop and I know these are quite difficult to find.
I was going to toss it in the dumpster but I figured I would put it up here in case someone wanted a little project.
So, if someone wants to take on a slight repair job to have an OE splitter, please have at it.
I removed it because it got damaged when I dodged a deer, but had to go off into the grass shoulder/ditch.
That bit of off-road journey damaged the driver side of the splitter.
There is heavy scratching on the driver side and a slight bend on the far drivers side.
Most of the original mounting clips were broken off and are not included.
Shipping will be a bit pricy due to size.
If there is any interest, make an offer!
__________________
2013 1SS/1LE
Corsa Extreme cat-back, Speed Engineering LT Headers with black ceramic coating, C7 Z06 Front Brake Upgrade, Mishimoto Oil Cooler, BMR Tunnel Brace, Mishimoto Oil Catch Can, MSD Plug Wires, Mishimoto Radiator and Hoses.