View Single Post
Old 11-11-2009, 08:44 AM   #13
21STCENTURYMUSCLECARS
 
21STCENTURYMUSCLECARS's Avatar
 
Drives: 2010 SS RS Silver Ice 6-sp
Join Date: May 2009
Location: Addison, TX
Posts: 75
Quote:
Originally Posted by old motorhead View Post
Good job! That's a whole lot of go on very little boost. LS3's and TVS's work well together. What size pulley did you use? I guess the cam specs are "secret"?

I'm looking for a little milder setup than the one on my vette. Vette made 672 at the wheels on a little over 8psi. It will go on wife's Camaro (auto tranny). The cam I used in the vette would be too big for an auto tranny Camaro. Would your cam play nice with an auto tranny/stock converter?
Thank You Sir for the compliment,
I will post the cam specs later today when I get to the shop, this cam was specifically designed for the Magnacharged LS3 MN-6, it makes great power and has a very nice chop for those guys that love to hear the cam without bleeding off boost as much larger cams will do.
I have a cam thas was also spec'd for the Magnacharged A-6 cars but it is
quite a bit smaller and I have not installed one yet to know what the power difference would be.
We have completed 3 TVS Magnacharged A-6s using the LS9 camshaft
with great results but it is virtually undetectable from a stock cam.

Best Regards,
John Page
Twenty First Century Muscle Cars
21STCENTURYMUSCLECARS is offline   Reply With Quote