Today was a good work day we installed a complete Brembo Brake kit from a
2SS/RS and put them on my 2LT/RS.
First off special thanks to Fesler Built (www.feslerbuilt.com
) for the OEM Brembo brakes off a 2010 Camaro SS I was able to pick up a complete kit from them (take off) rotors, pads, calipers, and brake lines).
We started this morning around 9:30-10am and we finished just after 12 noon. The front SS rotors and calipers bolt right up no modifications needed.
The rear SS rotors are a good 1-2" larger than the V6 rotors so you have two options replace the rear brake rotor shield with one from the SS cars or trim the existing one by 5/8" and the rotors will clear with no issues. The Brembo calipers mount up to all of the existing holes and the V8 brake lines or aftermarket ones are a must to reach.
I can tell what a difference in stopping power well worth the time in upgrading.
V6 owners with the RS package will have no issues with installing these.
Here you go lots of photos of the install.