View Single Post
Old 02-02-2010, 02:03 PM   #1
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 6,992
Anyone with an HHR SS or Implala SS

I'm trying to look for some SS emblems to put under the Camaro emblem on the fender. The SS on the rear of the Camaro are a little to small IMO. I saw an HHR that had an SS on the lift gate in the rear that looked smaller than the sides but bigger than the one on the Camaro rear.

I called the parts dept at the dealership and HHR SS emblems are different but he couldn't tell me the size of the two.

If you have an HHR SS could you get me the basic measurement of the rear SS vs the side SS?

If you happen to have an Impala SS could you check the size of the SS on the sides?

I found some on Ebay that are 4" wide that I think are what are from the rear of the HHR but I want to verify if I can before I pull the trigger to buy them.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote