View Single Post
Old 02-05-2010, 11:49 AM   #1
cerberus
 
cerberus's Avatar
 
Drives: 2010 CGM
Join Date: Nov 2008
Location: St. Charles MO
Posts: 510
Bowtie Modification for the Heritage Grille with SS emblem

Just went by the body shop where my car is having some work done and the owner made a step by step process for installing the bowties on the new Heritage Grille. However, I am having other mods done and unfortunately not the grille at the time. Anyways, he did use my bowtie to document this process.

Here is the process to mount the factory bowtie to the new heritage grille.



The center clips need to be removed. If you just wiggle them back and forth they come out easily. No need to save the pieces you remove.


Removed pieces.


Pic after center clip removal.


Our retainer clip. We will have these available soon.


Installing the clips on the backside of the heritage grille. Center the bowtie in the grille and push the metal clips onto the plastic clips on the bowtie.


Clip installed. The slight bowing of the grille bars does not show from the front when installed.


Installed bowtie.


Installed bowtie from the front.



Now with the SS ... more pictures posted below


Well, that about it...Enjoy
__________________
2 SS CGM RS, IOM interior, Customized by Clean Cut Creations St. Louis, MO

Last edited by cerberus; 02-05-2010 at 07:58 PM. Reason: took out links and added pictures added SS emblem
cerberus is offline   Reply With Quote