Thread: DTC'S
View Single Post
Old 10-09-2008, 08:39 PM   #2
CamaroSpike23
Mr. Nitpicky
 
CamaroSpike23's Avatar
 
Drives: anything I can get my hands on
Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,861
Send a message via Yahoo to CamaroSpike23
clean out your evap purge solenoid

bottom left picture in this diagram. take a small shopvac and pull the purge lines and suck the crap out of them. they get clogged over time and mess stuff up
http://shbox.com/1/evap_system.jpg
http://shbox.com/1/evap_sol.jpg

your EGR valve is probably worn.
fire up the motor, once its warmed up, reach behind the intake to the EGR valve and depress the valve inside the EGR valve, if the motor rpm/sound doesnt change at all, then you need to replace the valve.
also check the vacuum line for the egr solenoid as well
http://shbox.com/1/opti_vacuum_conn.jpg
http://shbox.com/1/egr1.jpg

for the fan, replace the relay in the fuse box under the hood.
__________________
Never race anything you can't afford to light on fire and push off a cliff
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.

Quote:
Originally Posted by Bulldogwinters View Post
Read that link that Spike posted, it'll tell you everything you need to know.
Quote:
Originally Posted by WheelmanSS View Post
Post count is truly an accurate measure of how cool someone is on the Internet.
Quote:
Originally Posted by Greg Norris View Post
I piss excellence
and fart awesomeness
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.
"You can think I'm wrong, but that's no reason to quit thinking.
Quote:
Originally Posted by Overflow View Post
But not all people were born awesome like you, Spike.
CamaroSpike23 is offline   Reply With Quote