View Single Post
Old 03-22-2010, 10:05 PM   #2
jrpxxii


 
jrpxxii's Avatar
 
Drives: 2010 Camaro SS/RS 427ci
Join Date: Jul 2009
Location: Bowling Green, Ky
Posts: 3,210
Here is everything you need to know.
PLEASE NOTE: If running Long-Tube Headers, you will loose 2 PSI of Boost and to gain that back, choose a pulley 2 sizes smaller!

- 3.60" pulley: expect 2.0 psi. more boost over stock pulley -Total boost 8.0 psi
- 3.40" pulley: expect 4.0 psi. more boost over stock pulley -Total boost 10.0 psi
- 3.20" pulley: expect 6.0 psi. more boost over stock pulley -Total boost 12.0 psi
- 3.10" pulley: expect 7.0 psi. more boost over stock pulley -Total boost 13.0 psi
- 3.00" pulley: expect 8.0 psi. more boost over stock pulley -Total boost 14.0 psi
- 2.90" pulley: expect 9.0 psi. more boost over stock pulley -Total boost 15.0 psi
- 2.80" pulley: expect 10.0 psi. more boost over stock pulley -Total boost 16.0 psi
- 2.70" pulley: expect 11.0 psi. more boost over stock pulley -Total boost 17.0 psi

WARNING: The only way to install the 2.70" Pulley is to have the Jackshaft Housing machined down for it to fit properly. Some Jackshaft Housing Castings are made differently in sizes and do vary, as to what the smallest pulley you can use without maching. The smallest size we recommend is 2.80", without any machining performed on the jackshaft housing casting area.
jrpxxii is offline   Reply With Quote