View Single Post
Old 06-30-2010, 03:31 PM   #6
scythezo6
Virologist in the making
 
scythezo6's Avatar
 
Drives: 2010 VR SS/RS LS3
Join Date: Aug 2009
Location: El Paso TX
Posts: 2,867
Pop off the bezels. Sand them down until they look like brushed aluminum (spellinglol).
Wash them. Dry them. Lay on 3 coats of adhesion promoter, 10 min between coats. Lay down 3-4 coats of your choice paint 10-15min between coats making the last coat a little thicker (without runs). Let dry for about 1/2 hour, examine for flaws. Sand out flaws with a lighter paper. Wipe clean with a damp rag. Lay on a final medium coat. Clear it if you wish. Basically what I did for mine and I love em.


__________________
Victory Red 1SS/RS Ordered - 8/4/09 & Joined Camaro5.com family
6000, Delivered to the customer - 12/21/09
scythezo6 is offline   Reply With Quote