View Single Post
Old 10-08-2010, 07:45 PM   #450
Z Madness
 
Z Madness's Avatar
 
Drives: 2010, 2000, 1971 Camaros
Join Date: May 2010
Location: Hawaii
Posts: 531
Quote:
Originally Posted by Beau View Post
I was just going to post about this. It sounds like you're running into an issue where you've reached the max hertz(frequency) with this MAF.

If this is the case, any improvement to airflow will result in issues even at lower boost levels.

Fear not though, you can upgrade to a larger diameter tube and recalibrate that MAF, or go with a MAF that will read a higher frequency and calibrate that MAF.

Trifecta should know what to do here. I'd start with the V8 MAF, I believe that would be a good place to start.
The MAF is not being maxed out. The readings were higher than what the ECM could process. We made good progress this week. Car is expected to go in the shop for some work on the front facia so hopefully we get this wrapped up soon after. Will update again in about a week or two. In the meantime, I'm sure we'll have lots to discusss with Jims results.
Z Madness is offline   Reply With Quote