View Single Post
Old 01-20-2011, 09:41 AM   #21
WileySG
 
WileySG's Avatar
 
Drives: 2011 Camaro 2SS/RS (IOM/IO)
Join Date: Aug 2010
Location: Brookfield, CT
Posts: 207
Quote:
Originally Posted by FwyFlyer View Post
Can you explain why one pair of the endlink ball joints have "flats" at the base of the stud and the other pair do not? I see that both pairs have the allen socket in the bolt end to hold the stud when installing the locknut. Which pair is top and which is the bottom?
Flyer,
The larger of the two studs goes to the sway bar and the smaller goes to the strut. I used an allen wrench to hold the stud from spinning. BIG difference over stock!!!
Wiley
__________________
2011 CAMARO 2SS/RS LS3
IOM/IO Interior, Black Rally Stripes, MGW Shifter, Stainless Works LT Headers, Hi-Flow Cats, Borla S-Type Catback, C.A.I. Intake, JRE Tune, Pedders Sways/Sub Frame Inserts, Hotchkis Springs, Spohn Arms, Elite Engineering Catch Can, The Powdercoater IOM Brake Calipers, Forgestar F14/Nitto Invo, Camaro Style CF Console, MPD1 Spoiler, SLP Splitter, EmblemPro Goodies

WileySG is offline   Reply With Quote