ARD finished my transmission and installed it this past Saturday. I'm still babying it, but this thing shifts nice. Much more quick and firm.
Just posted this up in the transmission section, but here are all the components to the stage III upgrade:
Replace oil pump return spring
Modify pressure regulator valve
Replace pressure regulator valve inner and outer springs
Modify valve body separator plate circuits
3-5 Reverse clutch feed
3-5 Reverse clutch feedback
1-2-3-4 Clutch feed
1-2-3-4 Clutch feedback
4-5-6 Clutch feed
4-5-6 Clutch feedback
Tig weld drums (common failure point)
1-2-3-4 Clutch Hub and Shaft Assembly
2-6 and 3-5 Reverse Clutch Hub and Shaft Assembly
2-6 Alto Red Eagle Power Pack (50% more surface area)
3-5-Reverse Red Eagle Power Pack (70% more surface area)
4-5-6 Alto Red Eagle Power Pack (50% more surface area)
1-2-3-4 Clutch Pack Replaced with Alto High Energy Clutches
Reverse Clutch Pack Replaced with Alto High Energy Clutches
Replace all seals, gaskets and filter
I'm waiting on some pics, and will post them up as soon as I get them.
Last edited by Dangeruss; 02-02-2011 at 10:18 AM.