View Single Post
Old 05-17-2011, 02:00 PM   #332
CFD



 
Drives: 2SS/RS L99 BLACK
Join Date: Apr 2010
Location: MASS.
Posts: 4,865
Hi all, it seems that some are having difficulty in releasing the terminal for the signal wire. A couple of things to help with this. The most effective household "tool" I have found for this would be a decent sized sewing needle. Next is where to insert the tool. The attached picture has a piece of red wire inserted where the needle would be inserted to release the tang. If you look real close at your connector you can see the plastic tang that needs to be raised to release the terminal. Also attached is a quick sketch to help illustrate how it works. Hope this helps.
Attached Images
  
CFD is offline