View Single Post
Old 09-04-2011, 01:16 AM   #147
TAG UR IT's Avatar
Drives: 2014 ZL1 #705
Join Date: Jul 2006
Location: SA, Texas
Posts: 26,637
Your light tube on the drivers side appears waaaay too high. Dremel down the back if you need (don't break the connectors, though). And take a micro screwdriver and push that tube down in there. It also looks like it may be a tad bit too long. You might need to cut it some. Also, use some electrical tape on the end if you need. That will help to prevent the light from coming out of the edge.

Weather stripping on the passenger side. DO EET!

TAG UR IT is offline   Reply With Quote