View Single Post
Old 11-02-2011, 01:02 AM   #1
anglwngss
Lone Star Camaro
 
anglwngss's Avatar
 
Drives: 2011 Synergy Green 2SS/RS
Join Date: Oct 2010
Location: Venus, Tx
Posts: 1,634
DIY Change Radio LEDs

Sorry for the wait everyone. Please don't hesitate to ask any questions, though I can't guarantee I'll be able to answer them all! lol

Anyway, onward to the DIY.












There are 4 different sizes of screws to this thing. Unfortunately, I did not mark what went where, sorry about that.














Somewhere around here, I skipped a step. The larger circuit board is connected to the black housing by a white connector plug. You will need to disconnect the circuit board from the black housing. I don't have a picture of this, sorry.

Do NOT attempt to remove the screen from the metal housing bracket. It is not required in order to get to the circuit board. Most likely, if you do this, you will end up damaging the LCD screen.



Do NOT attempt to remove the screen from the metal housing bracket. It is not required in order to get to the circuit board. Most likely, if you do this, you will end up damaging the LCD screen.













The LEDs used in the picture below were 1206s.




To put back together, Follow in reverse order... Here are some tips to keep in mind and hopefully, help out as well.

































My final products





__________________

Questions about Lone Star Camaro? Email me: Treasurer@LoneStarCamaro.com

Last edited by anglwngss; 08-17-2012 at 10:55 PM.
anglwngss is offline   Reply With Quote