constant 12v for cigarette lighter socket
Had some members ask me about my mod for the cigarette lighter so here are some picture that partly show the simple fix. There is a 12v constant wire already in the wire bundle if you just remove the shift plate/gauge cluster plate from around the shifter. It easily removes by pulling up. The 12v constant wire is the red wire with the white stripe. Just remove about 1/4 inch of the wire coating on the red/white wire and remove the green wire and red/white wire from the plug harness. Strip back the green wire and wrap it around the exposed part of the red/white wire. Put heat shrink tubing over both wires and heat. Insert the red/white wire back into the original spot in the plug. Wrap the whole thing back up as it was and enjoy!!