View Single Post
Old 02-15-2012, 03:38 PM   #102
TRC-SS's Avatar
Drives: 2011 Forged LS3 Supercharged/Cammed
Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,208
Tackled more of the Fog light relocation today!

I used a Dremel and Cut out a portion of the lower grille to make way for the Fog light. The light is actually a bit bigger then one of the spaces so had to cut into alittle to the left on each side but it does fit right in nicely.

The lights are just resting in place right now, I still need to line them up straight and make a bracket to hold them in place to the crush support bumper.

In order for this to work the black plactic support frame behind the bumper needed to be cut and the support frame it self needed to come off the car and its going to be notched out and weld in a new peice of metal to allow the fog light to fit all the way inside as they sit in the photo above.

More photos to follow in the next few weeks as i attempt a trial and error method on the brackets
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL
TRC-SS is offline   Reply With Quote