Quote:
Originally Posted by formare
I run seafoam. Very happy with it. OP you might want to check out YouTube for videos on how most do the procedure. I would not drive the car unti the procedure was complete. Normally I run it through the front PVC connection not the brake booster.
This helps ensure a more even distribution to all cylinders. Once the product is "in" ( this is the procudeure part ) shut the engine off for a few minutes. Then let the engine idle until the smoke has cleared. Normally you will see no CEL if done per instructions.
|
So was I suppose to let it idle until no more smoke?
Sent from my DROID RAZR using Tapatalk