View Single Post
Old 07-26-2012, 02:48 PM   #1
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 10,993
Stainless Works & SP Headers | Best Prices | Free Shipping | JDP Motorsports

Hi Everyone!

JDP Motorsports is proud to use and offer Stainless Works headers and exhaust! Featuring CNC mandrel bent tubing from high quality 304 stainless steel, these headers will last a lifetime. We have installed many sets of headers here at JDP and the SW headers fit great and make excellent power. By installing Stainless works headers on your SS or ZL1 Camaro you'll also gain an aggressive tone at idle and a beast at wide open throttle!

Factory Connection: These systems are designed to connect to a factory or any aftermarket exhaust system.



Stainless Works - 1 7/8" x 3" Long Tube Headers w/out Cats - 2010-2015 Camaro SS/ZL1 - SWS-CA11HORST


Stainless Works long tube headers without cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 1 7/8" primaries, 3" collectors, welded o2 bungs, o2 extenders, a 3" lead pipes, along with all the necessary hardware and gaskets for a bolt-on installation.

Note: System will delete your catalytic converters and is for off road use only.

Stainless Works - 2" x 3" Long Tube Headers w/out Cats - 2010-2015 Camaro SS/ZL1 - SWS-CA11HOR

Stainless Works long tube headers without cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 2" primaries, 3" collectors, welded o2 bungs, o2 extenders, 3" lead pipes, along with all the necessary hardware and gaskets for a bolt-on installation.

Note: system will delete your catalytic converters and is for off road use only.

Product Features
- Tig welded 304 stainless
- CNC mandrel-bent primary tubes
- Welded o2 Bungs with o2 Extenders
- Ball flange collector for great leak free performance
- Gaskets and hardware included for a complete installation
- Made in the USA!
- Free Shipping to the Lower 48!

MSRP: $1,325.00
Sale $1,192.50



Stainless Works - 1 7/8" x 3" Long Tube Headers w/Cats - 2010-2015 Camaro SS/ZL1 - SWS-CA11HCATST

Stainless Works long tube headers with cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 1 7/8" primaries, 3" collectors, welded o2 bungs, o2 extenders, high flow catalytic converters, and 3" lead pipes, along with all the necessary hardware and gaskets for a bolt-on installation.

Stainless Works - 2" x 3" Long Tube Headers w/Cats - 2010-2015 Camaro SS/ZL1 - SWS-CA11HCAT

Stainless Works long tube headers with cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 2" primaries, 3" collectors, welded o2 bungs, o2 extenders, high flow catalytic converters and 3" lead pipes, along with all the necessary hardware and gaskets for a bolt-on installation.

Product Features
- Tig welded 304 stainless
- CNC mandrel-bent primary tubes
- Welded o2 bungs with o2 extenders
- Ball flange collector for great leak free performance
- Gaskets and hardware included for a complete installation
- Made in the USA!
- Free Shipping to the Lower 48!


MSRP: $1,525.00
Sale $1,372.50


Performance Connections: Can only be used with Stainless Works connection exhaust system.



Stainless Works - 1 7/8"x3" LT Headers w/out Cats for SW Exhaust - 2010-2015 Camaro SS/ZL1 - SWS-CA11H3ORST

Stainless Works long tube headers for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 1 7/8" primaries, 3" collectors, welded o2 bungs, o2 extenders, and 3" off road lead pipes to fit Stainless Works exhaust systems.

Note: This system does not neck down and only fits the Stainless Works performance connect exhaust.

Stainless Works - 2" x 3" LT Headers w/out Cats for SW Exhaust - 2010-2015 Camaro SS/ZL1 - SWS-CA11H3OR


Stainless Works long tube headers for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 2" primaries, 3" collectors, welded o2 bungs, o2 extenders, and 3" off road lead pipes to fit Stainless Works exhaust systems.

Note: This system does not neck down and only fits the Stainless Works performance connect exhaust.

Product Features
- Tig welded 304 stainless steel
- CNC mandrel-bent primary tubes
- Welded o2 bungs with o2 extenders
- Ball flange collector for great leak free performance
- Gaskets and hardware included for a complete installation
- Made in the USA!
- Free Shipping to the Lower 48!


MSRP: $1,325.00
Sale $1,192.50



Stainless Works - 1 7/8"x3" LT Headers w/Cats for SW Exhaust- 2010-2015 Camaro SS/ZL1 - SWS-CA11H3CATST

Stainless Works long tube headers with cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 1 7/8" primaries, 3" collectors, welded o2 bungs, o2 extenders, high flow metal matrix catalytic converters, and 3" lead pipes to fit Stainless Works exhaust systems.

Note: This system does not neck down and only fits the Stainless Works performance connect exhaust.

Stainless Works - 2" x 3" LT Headers w/Cats for SW Exhaust - 2010-2015 Camaro SS/ZL1 - SWS-CA11H3CAT

Stainless Works long tube header with cats for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 features 304 stainless steel CNC mandrel-bent 2" primaries, 3" collectors, welded o2 bungs, o2 extenders, high flow metal matrix catalytic converters, and 3" lead pipes to fit Stainless Works exhaust systems.

Note: This system does not neck down and only fits the Stainless Works performance connect exhaust.

Product Features
- Tig welded 304 stainless steel
- CNC mandrel-bent primary tubes
- Welded o2 bungs with o2 extenders
- Ball flange collector for great leak free performance
- Gaskets and hardware included for a complete installation
- Made in the USA!
- Free Shipping to the Lower 48!


MSRP: $1,525.00
Sale $1,372.50

WE INSTALL PARTS!!
If you are looking to have work performed or have one of our packages installed on your vehicle, we have a facility in Sandy, Utah where we perform everything from bolt-on installations, Dyno testing/tuning and complete race car builds. Our install shop fills up fast, so please call us to set up an appointment.

Best regards,

Kayla L.
801.545.4215
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215

Last edited by JDP Sales; 11-11-2016 at 04:34 PM.
JDP Sales is online now   Reply With Quote