View Single Post
Old 10-13-2012, 11:40 AM   #101
2012-2SS
 
2012-2SS's Avatar
 
Drives: 2012 Camaro 2SS/RS
Join Date: Dec 2011
Location: Dover, NH
Posts: 647
Sh!t happens dude. Last month the aftermarket heads on my truck warped causing a head gasket to blow. After pulling the heads I found the valve seals pulled out of the heads and rode up the valve stems. Upon further inspection I found the inner valve springs to be broken damaging the spring pads. I guess my cam is too big...:screwy:
So instead of machining the heads and replacing/upgrading the whole valve train, I chose to just buy a whole new set of heads and now the engine runs better than before.

Let me know how it turns out for ya

Oh and good call on dropping the under drive pulleys. I don't see a point using them on a street driven vehicle.

Sent from my Nexus S 4G using Tapatalk 2
__________________
2012 Camaro 2SS/RS, Hurst Short Throw, IdealG M/C, Pypes Pipe Bomb, LSR Cold Air Intake, LSR Toe Links/Lower Control Arms Clear Image headers, high flows, Slowhawk tune
1974 Chevy K10 Built 355, FAST EZ EFI, 5speed
2000 Chevy Tahoe LT 5.3L, Slowhawk tune

2012-2SS is offline   Reply With Quote