View Single Post
Old 11-19-2012, 08:32 PM   #16
Nitroman28

 
Nitroman28's Avatar
 
Drives: 2010 Camaro SS A6
Join Date: Oct 2010
Location: Arkansas
Posts: 1,548
Quote:
Originally Posted by ITGuy11 View Post
The ZL1 pump and ADM controller are providing plenty of fuel. Under high flow conditions the fuel pressure is increased to 67psi above 4000rpm. We just logged fuel pressure on the dyno today and it holds strong. Also verified pressure with a mechanical fuel pressure gauge at the fuel rail.

I am running the 3.8" pulley up front with the OD rear cog drive on the rear. This is making the 9.5 pounds of boost.
Thanks for the reply, I'm going to be running the same setup, Just different cam and ported heads. Just don't want to go over 10lb.
Nitroman28 is offline   Reply With Quote