you don't need to setup voice commands on your phone....there are two methods to dialing using a "name".
(1) Use stored name tags. This allows you to store a name tag to a number. So that when you say Call and the name of the stored name tag that number will be called. To do this follow these instructions:
1. Press the Push to Talk button
2. Your system will respond with a "Ready" message followed by a tone
3. Clearly say "Store"
4. Your system will respond with a "Store, number please" message followed by a tone
5. Clearly say the phone number you want to store
6. If the system recognizes the phone number, your system responds with an "Okay, storing" message and repeats back each digit
7. If your system doesn’t recognize the phone number, it responds with a "Store" message and repeats the number to store followed by "Please say yes or no"
8. Once the number has been stored, your system will prompt you for a name tag using the "Please say the name tag" message followed by a tone
9. Clearly say the name tag you want associated with the number
10. Your system responds with an "About to store <name tag>, does that sound okay?" message followed by a tone
(2) The second option is to use the voice pass-thru feature which allows you to access the voice commands on your phone (if the phone supports voice recognition) and use it to call a name as if you were using you phone. To use this feature:
1. Press the Push to Talk button
2. Your system will respond with a "Ready" message followed by a tone
3. Clearly say "Bluetooth"
4. Your system will respond with a "Bluetooth ready" message followed by a tone
5. Clearly say "Voice"
6. Your system will respond with an "Okay, accessing <phone name>" message
7. The phone’s normal prompt messages will go through its cycle according to its operating instructions