I started a new project. This is part 1 one the project I removed the intake manifold and throttle b. I degreased and cleaned the parts and sanded with a 350 grit scotch bright pad. Grandpa wanted to help so he painted the parts with VHT RED caliper paint. Here is the end result from 3 hours of work. The next part is going to be cuting the cover to let the mani be seen. and the adition of RGB leds. I like the red accenting matches mz badges. Forgive the dirt please it had been raining all week so no cahnces to clean
Last edited by IBM camaro; 10-03-2014 at 05:46 PM.