View Single Post
Old 01-17-2013, 06:57 AM   #3
chvyman
 
chvyman's Avatar
 
Drives: 2SS 45TH,gfx,blade spoiler,h grille
Join Date: Jan 2010
Location: Leechburg PA
Posts: 269
basicly you have to bypass the resistor wire that feeds the stock dist. and supply a 12 volt feed from you ignition switch to the H.E.I. unit. the stock set-up starts with 12 volts but once the start procedure is complete it goes down to 9.5 volts to run. electronic ignition needs a full 12 volts.
chvyman is offline   Reply With Quote