View Single Post
Old 02-14-2013, 06:09 PM   #1
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2010
Location: SLC, UT
Posts: 6,414
Intakes Intakes INTAKES!!! Camaro SS | FREE SHIPPING | JDP Motorsports

Hello Camaro5! JDP motorsports is proud to offer a wide range of intake system options for your LS3/L99 Camaro SS!

AIRAID
AIRAID® Intake Systems make horsepower that you can feel. Average gains of horsepower for an AIRAID® Intake System are typically 10-15hp with many making up over 20hp!

Every AIRAID® Intake System is designed for a specific vehicle. We start with the vehicle in stock form and test it on the AIRAID® Mustang Dynamometer to measure the baseline horsepower at the rear wheels.Development for an AIRAID® Intake kit included flow testing and filter, intake tube and other critical pieces of thekit making sure they are operating optimally. After we have developed the AIRAID® intake kit we then test the vehicle again on the AIRAID® Mustang Dynamometer to measure the average increase in power.

AIRAID® Intake Systems are computer designed to give your engine maximum air flow, which means more horsepower, torque and improved performance. Every AIRAID intake system is dyno tested and tuned to provide maximum performance and efficiency. By utilizing computer-aided design, AIRAID Intake Systems offer unmatched fit, finish and lifetime warranty. Each AIRAID® intake provides superior air filtration, since it comes with an AIRAID Premium Filter featuring our exclusive filter technology.

AIRAID® Premium Filters are constructed using the finest materials available today. All AIRAID® Premium Filters utilize a hand-poured urethane body that won’t crack, curl or shrink like other rubber or plastisol units used by our competitors. Filtration performance is second to none, and at No Extra Cost, thanks to the combination of our proprietary material and multiple cotton gauze layers. All AIRAID® Premium Filters are 100% washable, reusable and feature our Lifetime “No-Hassle” Warranty.
Airaid - Lifetime "No-Hassle" Warranty

"We believe this is the finest air filter you will ever own, and we stand behind it. Our "No Hassle Warranty" is simple: If you are ever dissatisfied with the materials, workmanship, or performance of this air filter, just send it back... period! You don't have to worry about a proof of purchase or a warranty card. AIRAID filters are warranted for life."

Airaid - Intake System - 2010-2014 Camaro SS - Part # 250-243

Product Features

- Easy to install with basic hand tools
- Free Shipping to the lower 48!
- HP increase Guaranteed
- True OEM Direct Replacement
- Hand Poured Urethane Body – Won’t crack, shrink, or curl like Rubber or Plastisol
- AIRAID’s exclusive unique filtration technology – enables the AIRAID filter to filtrate far superior to the average cotton filter
- Proudly Made in the USA
- Free Shipping to the lower 48!

MSRP: $553.69
Sale $359.90 Includes a FREE $50 MasterCard gift card!


Airaid - Intake System w/SynthaMax non-oiled air filter - 2010-2014 Camaro SS - Part # 251-243

Product Features

- Easy to install with basic hand tools
- HP Power increase Guaranteed
- True OEM Direct Replacement
- Hand Poured Urethane Body – Won’t crack, shrink, or curl like Rubber or Plastisol
- AIRAID’s exclusive unique filtration technology – enables the AIRAID filter to filtrate far superior to the average cotton filter
- Proudly Made in the USA!
- Free Shipping to the lower 48!

MSRP: $566.00
Sale $367.90 Includes a FREE $50 Mastercard gift card!


Airaid - Intake System w/Carbon Fiber Tube - 2010-2014 Camaro SS - Part # 250-243C

Product Features

- Easy to install with basic hand tools
- Carbon Fiber Tube
- HP increase Guaranteed
- True OEM Direct Replacement
- Hand Poured Urethane Body – Won’t crack, shrink, or curl like Rubber or Plastisol
- AIRAID’s exclusive unique filtration technology – enables the AIRAID filter to filtrate far superior to the average cotton filter
- Proudly Made in the USA

MSRP: $922.92
Sale $599.90 Shipped! Includes a FREE $50 MasterCard Gift Card!


Airaid - Intake System w/Carbon Fiber Tube & SynthaMax Non-Oiled Air Filter - 2010-2014 Camaro SS - Part # 251-243C

Product Features

- Easy to install with basic hand tools
- SynthaMax Non-Oiled Filter
- Carbon Fiber Tube
- HP increase Guaranteed
- True OEM Direct Replacement
- Hand Poured Urethane Body – Won’t crack, shrink, or curl like Rubber or Plastisol
- AIRAID’s exclusive unique filtration technology – enables the AIRAID filter to filtrate far superior to the average cotton filter
- Proudly Made in the USA
- Free shipping to the lower 48!

MSRP: $935.23
Sale $607.90 Shipped Includes a FREE $50 MasterCard Gift Card!


BBK
Now Available to Fit the new 2010-2014 Gen 5 Camaro SS V8. BBK Performance Chrome Cold Air Intake Systems add great looks under the hood as well as improved horsepower and throttle response in minutes with simple hand tools!

These Great Looking BBK Performance Chrome Cold Air Kits add a stealthy, modern look under the hood of your favorite performance 2010-2014 Camaro SS. As always it is a direct fit replacement kit with no tune required - Simply installation with hand tools. Once Installed you will have increased throttle response and approx 12-18 rear wheel horsepower depending on other modifications.

BBK - Chrome Intake System - 2010-2014 Camaro SS - Part # 1771


MSRP: $349.99
Sale $299.99 Shipped


BBK - Black Out Intake System - 2010-2014 Camaro SS - Part # 17715



MSRP: $349.99
Sale $299.99



Cold Air Inductions

Maximize your Camaro's performance with CAI's high performance air intake system. Their intakes surpass their competitors with superior quality and craftsmanship while achieving outstanding performance gains. We see on average, a 15 rwhp increase on otherwise stock Camaro SS.

Cold Air Inductions - Intake System - 2010-2014 Camaro SS - Part # 501-1099-10B


Product Features

- Black Aluminum Insulated Air Box
- Black Air Box lid
- 4.0" (102mm) Black Powdercoated Intake Tube
- High Performance Air Filter (CF-8400)
- Black Silicone Coupler / Stainless Clamps
- Includes Free Shipping to the lower 48!
- Proudly Made in the USA

Price $399.99 Shipped Includes your choice of a FREE CAI filter recharge kit or a FREE $25 MasterCard gift card!


Cold Air Inductions - Intake System - 2010-2014 Camaro SS - Part # 501-1099-10


Product Features

- Aluminum Insulated Air Box
- Air Box lid
- 4.0" (102mm) Ceramic Coated Intake Tube
- High Performance Air Filter (CF-8400)
- Black Silicone Coupler / Stainless Clamps
- Includes Free Shipping to the lower 48!
- Proudly Made in the USA

Price $399.99 Shipped Includes your choice of a FREE CAI filter recharge kit or a FREE $25 MasterCard gift card!



Halltech
Halltech's Yellow Jacket™ One Piece Cold Air Induction System is a cross-linked polyethylene clone of the carbon fiber version of the Halltech Yellow Jacket™, designed for bolt on increased horsepower and torque without requiring re-programming. Dyno proven to increase your otherwise stock Camaro SS by 14.2 RWHP/9lbs-ft. Torque.

Halltech - Yellow Jacket Cold Air Intake - 2010-2014 Camaro SS - Part # YJ440


Product Features

- Increased HP and Torque
- Plastic Heat Shield
- Factory OEM Mass Airflow Sensor with O-Ring recess for better seal and no codes
- Utilizes stock MAF sensor and screws
- Exclusive K&N Lifetime Filter included
- Easy to install
- Includes Free Shipping to the lower 48!

Price $399.99 Shipped!


Halltech - Bumble Bee Carbon Cold Air Intake - 2010-2014 Camaro SS - Part # HBBCF16
Halltech's Bumble Bee™ One Piece Cold Air Induction System is made of dry carbon fiber pre-preg, oven cured for lightness and strength, and requires re-programming MAF tables. Dyno proven to increase your otherwise stock Camaro SS by 15.2 RWHP/10lbs-ft. Torque.

Product Features

- Increased HP and Torque
- Plastic Heat Shield
- Factory OEM Mass Airflow Sensor with O-Ring recess for better seal and no codes
- Utilizes stock MAF sensor and screws
- Exclusive K&N Lifetime Filter included
- Easy to install
- Includes Free Shipping to the lower 48!

Price $599.99 Shipped!



Injen
Maximize your Camaro's performance with Injen's high performance air intake system. Build from lightweight aluminum and featuring MR Technology created by Injen for safe air/fuel ratio and extremely efficient tuning process. This system is dyno proven to add 21+ HP and 15+ ft/lbs of torque.

Injen - Black Cold Air Intake - 2010-2014 Camaro SS - Part # PF7015WB

Injen - Polished Cold Air Intake - 2010-2014 Camaro SS - Part # PF7015P

Product Features

- Lightweight Aluminum Intake Pipe
- Large, Cleanable Air Filter
- Nano-fiber Dry Filter
- Includes Replacement Reservoir Bottle
- Bolt-on Installation
- Backed by a Limited Lifetime Warranty
- Made in the USA!
- Free Shipping to the Lower 48!

MSRP: $575.00
Sale $437.00
Call, PM or email for Camaro5 price!



K&N
K&N intake systems replace your vehicle's restrictive factory air filter and intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the OEM filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable and reusable. Most of K&N's intakes are relatively easy to install using basic hand tools. 63 series intakes are street legal in most states. They are not legal for use in California and other states adopting the California emission standards.

EASY INSTALLATION
Sound complicated? That’s the great part, K&N air intake systems are easy to install. A typical installation can be done with a screwdriver, pliers and a ratchet-set in 90 minutes or less! K&N specifically engineer the kits to use existing factory holes and mounting points, making installation simple. The vast majority of our cold air intakes do NOT require any cutting or drilling.

K&N - Million Mile Lifetime Warranty
K&N invented the world’s first air filter guaranteed for one million miles. That same warranty applies to our High-Flow Air Intake Systems. K&N's products are well engineered, built with the finest materials and they stand behind them 100%. View their warranty page for further details.

K&N - Aircharger Intake System - 2010-2014 Camaro V8 - Part # 63-3074
Includes: Composite intake tube, cold air dam, and highflow washable air filter. Aircharger systems are a sister product to K&N's 57 Series FIPK. The K&N 63 Series AirCharger Intake Kits are guaranteed to increase horsepower and come with a Million Mile Limited Warranty.

Product Features

- Guaranteed to Provide more HP and Increased Acceleration
- Engineered to Specific Vehicle Design
- Easy to Install, Usually in 90 minutes or less!
- Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
- Air Filter is Washable and Reusable
- Replaces OEM Filter and Air Box
- Works with Original Equipment Manufacturer Computer Systems
- Designed to use Factory Holes & Mounting Points Whenever Possible
- FREE shipping to the lower 48!

MSRP: $499.00
Sale $299.95 Shipped!


K&N - Typhoon Series Intake System - 2010-2014 Camaro SS V8 - Part # 69-4519TP

Typhoon Series Intake featuring free-flowing mandrel-bent aluminum tube, cold air dam and highflow washable air filter.


MSRP: $513.97
Sale $299.95 Shipped!



LG Motorsports
LG's new cold air induction for the Generation 5 Camaro SS features a true velocity stack inlet that is not seen on any other induction on the market. This velocity stack is good for another 6-8 hp over the competition due to the increase in air speed and smooth air flow into the engine. The kit is complete from engine to filter assembly and includes it's own built in heat shield to protect the air from the hot engine heat.

With the velocity stack, large inlet tube, and high flow filter LG has seen 14-18 hp increases over the OEM stock intake setup with no other changes made to the car.

LG Motorsports - Velocity Cold Air Intake - 2010-2014 Camaro SS - Part # 2267

Product Features

- High flow 4" inlet tube with velocity stack
- High flow, smooth bore inlet elbow
- Heat shield with seals
- Washable high flow air cleaner
- Clamps
- Air breather line
- Includes Free Shipping to the lower 48!

MSRP: $395.95
Sale $345.95



Roto-Fab
Roto-Fab Intake System featuring a black plastic tube, black hoses, high gloss black air box, and oiled air filter. Multiple options available to customize it to fit your style.

Roto-Fab - Intake System - 2010-2014 Camaro SS V8 - Part # 10151005

Product Features

- Easy to install with basic hand tools
- Air Box custom made to keep engine/radiator heat away from your filter
- Molded air box adapter tube incorporates the MAF (mass air flow) sensor
- Large 6" filter mounting flange
- Inlet elbow available in cross link poly (plastic), polished or painted stainless steel or with carbon fiber hydragraphics finish
- High quality silicone hoses available in a variety of colors
- Air Box available in a variety of colors
- Installs easily using factory mounting points
- Doesn't set any codes/ no tuning required
- Oil or dry filter available

Price starting at $359.95
Call, PM or email for Camaro5 price!




We are also proud to offer VMAX CNC Ported Throttle Bodies to compliment your intake system!

Features increased throttle response as well as HP/TQ gains through out the power band. We've seen 6-10 RWHP with this simple and inexpensive mod; for the money they can't be beat! These TB's don't require any tuning and the install is 15-20 minutes taking your time. We offer NEW TB's as well as used TB's and a core charge does apply. The cores must be in good condition and returned to us within 2 weeks of receipt of the VMAX TB.

VMAX - CNC Ported Throttle Body - 2010-2014 Camaro SS - Part # VMAXLS3TB


Product Features

- Increased throttle response
- HP/TQ gains through out the power band
- Factory CNC Ported Throttle Body
- Free Shipping to the lower 48!

MSRP: $160.00
Sale $150.00 Shipped! + $200 refundable core deposit
*Customer is responsible for return shipping unless the return label option is selected*

We are always happy to answer questions, so please feel free to call, PM or email me anytime!

Best regards,

Tyler
888-308-6007
Click HERE to send me a private message.
Sales@jdpmotorsports.com
__________________

Last edited by JDP Tyler; 12-05-2013 at 06:34 PM.
JDP Tyler is offline   Reply With Quote