View Single Post
Old 02-26-2013, 05:07 PM   #1
cliffdog89
 
cliffdog89's Avatar
 
Drives: 2LT/RS M6 '12 Camaro
Join Date: Aug 2012
Location: New Jersey
Posts: 311
'12 2LT RS Inferno Camaro Build

Hi Everyone, this is Cliff and my '12 2LT RS Inferno Camaro Build. A recent Engineering Student graduate, my first purchase out of college was this baby. While I had my heart set on an identical SS, my wallet and gas prices convinced me to opt with the 3.6L Manual V6 (Although I hope to add an SS 1LE to my collection one day).

My planned modifications are listed below and the thread will be updated as they are installed. I will also include detailed contact information and specs for any body shops, parts, or websites used in the modification process. Any parts or materials used will also be reviewed as I have found this lacking in a lot of builds.

I hope you enjoy and please contact me with any questions!
- Cliff

============================ Most Recent Photo ================================



Modifications
Cover King Seat Covers
Powder Coated Rims
Cold Air Inductions CAI System

Planned Modifications

Interior:
Ambient Lighting Kit
Sill Plates

Exterior:
Rear and Side Window Tinting
Razzi V6 GFX kit
Rider Graphix Wheel Pin-striping
Painted Bowties
Black Rear Light Bezel
Rear Black-Out kit
Big Worm Graphix Hood Spear Decals
Big Worm Graphix Light Black-Out kit
Big Worm Graphix Side Spears
Gullwing Doors

Engine Bay
Strut Tower Brace
Painted Engine Cover
Painted Fuse Box Cover
Roto-Fab Radiator Cover

Performance
Cat-Back Exhaust System (Open to suggestions)
Automatic Cut-outs
Ported Throttle Body
Headers

March 2013

================= Mod 1: CoverKing Seat Covers ==================
Purchased: Carid.com
Price: $149.99 + $30.00 ("Camaro" Stitched Headrest Cover)
Recomendation: I would recommend these covers if you want to protect your seats. The "Camaro" stitching across the headrest also looks great from the outside and adds to the look of the car. These are very comfortable and easy to clean.

I purchased seat covers after discovering a small tear in the passenger side leather. This was somewhat of a bitter sweet modification as I love the stock orange accented leather but I wanted to protect the seats from any future damage. Starting to take the Camaro to shops for upgrades, I am much more comfortable with mechanics and gear heads moving my car with these seat covers installed. I am also no longer grimacing when friends come along for rides

Installation:
The installation is a little tricky - the instructions are not over helpful as they are generic. The bottom portion of the cover fits snugly on over the seat with the edges tucked into the plastic trim. Two straps extend under the seat from the front of the cover to the back. These straps are extremely difficult to tighten and I had to use a heavy gauge wire to pull the draw strings taunt. I ended up only doing one of the two straps on the passenger side as it was too difficult to fish the wire through the under-seat motors. The back cover fits snugly with a portion being slipped between the backrest and seat. This is portion is Velcroed to the rear portion of the the backrest cover. The headrest installation is intuitive.

Issues:
One issue I noticed is that when the backrest is lowered for someone to enter the rear seat of the vehicle the covers shift a little. This shifting is minimal with proper installation an can easily be corrected in a few seconds. Also, there are a couple straps hanging from the rear of the backrest cover that I could not figure out where to attach to. These are just pushed under the seat (I never sit in the back so I don't mind lol). Also, there is a flap that extends from the back of the backrest down to the floor (not a tight fit); however, this keep feet from being put on your rear seats.



========= Mod 2: Powder Coat Stock Rims and Fix Curb Rash ==========
Body Shop: Kwicksilver Wheel Repair
Location: 13 New Brooklyn Road Edison, NJ 08817
Contact: jiskander@kwicksilverusa.com
Price: $175/wheel (including curb rash repair to one rim)
- Included unmounting wheels from car, removing tires, removing TPM sensors, remounting TPM sensors, remounting tires, remounting wheels to vehicle.
Recomendation: I would highly recommend this repair shop. I emailed John with photo's of my curb rash and a request to powder coat my rims. He called me back later that evening and was extremely helpful through the whole process in setting up an appointment. I arrived at his shop at 8:30AM with my vehicle - by 1:30 I was leaving with beautiful powder coated rims. He stepped me through the whole process and showed me each stage of the application.

After having the car for 1 week I had my first (hopefully my last) experience with curb rash. My previous/other vehicle ('89 Caprice) has large walled tires which don't mind a curb now and then but the Camaro was a whole different animal. Needless to say I found that out the hard way. After a significant amount of researching and getting various prices from repair + powder coating I opted with John at KwickSilver due to some good reviews he had received.







============================== Pre-Mod =====================================






Last edited by cliffdog89; 05-04-2013 at 03:42 PM.
cliffdog89 is offline   Reply With Quote